After switching on my printer, which is attached to my comp. the printer just clicks, and won't print. I notice that when I am copying, the bright light doesn't come on. The wording on the printer just says either "warming up" or "scanner failure- turn power off then on again". Even when I take the plug out, then put it in again - several times-nothing happens, it still doesn't work. Please help. Thankyou.
Hi thanks for using fixya!!
One thing to do, try to uninstall and install again the CD software of your printer then try to set again the correct configurations to your pc, and try to scan and print. If still giving you the same problem, perhaps you need to send it to a service center to further check the hardware part of your printer.
Regards!
DUPLEX OFF/ON
This item appears only when an optional duplexer is installed. Set
the value to ON to print on both sides (duplex) or OFF to print on
one side (simplex) of a sheet of paper.
The default setting is OFF.
Print on both sides (Duplex) Click Print on both sides. If you will bind the document along
the top edge, click Flip pages up.
User manual:
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01295101/c01295101.pdf
Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
Thanks, Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
175 views
Usually answered in minutes!
×