Display problem my computer p4 do not display

Sometimes if a VGA cable is not screwed into to both your Tower and your Monitor, it can get loose and thus resulting in no signal.
Another cause of a Monitor Displaying the no signal message would be due to the Graphic Card failing, or possibly due to the Graphic Card not correctly being seated.

Other Thoughts
--------------------
Usually P3 and P4 refers to a cable on your power supply that needs to be attach to your motherboard to supply extra power.

Note:
If your P4 cable is not plugged in before turning on your computer, this will also result in your Monitor displaying the no signal message.
Keep in mind though, if your computer has not been opened or is not a custom built PC, you should not have to worry about such issues as your P4 cable should in theory be connected. However I guess safely checking won't hurt anyone.

If the display does not work, it will need to be sent to Shure for repiars. www.shure.com/service

on the board there are numbers near the pci slots or cpu socket area pci are white plastic slots look on the side of them too

This may not be an accurate reading. Try downloading zcpu to conduct a test of your true processor speed

1)Asus Terminator P4 533A SiS650/651/740 Display Driver 2.09L:
http://www.downloadplex.com/Drivers/Display-Adapters/SIS/asus-terminator-p4-533a-sis650651740-display_118966.html

2)ASUS Terminator P4 533 Bios v 1008
http://www.techspot.com/drivers/driver/file/information/5176/

Please vote if this helps.

sounds like a bad processor not motherboard....

you have the drivers for p4 like chipset, sound, display, and lan

give me detail of o/s and your computer configuration

reply me i will help you

have you checked your jumper settings on the primary hard drive to ensure they are set to master or cable select

Clear your bios, remove your all pci cards & then try.

Use the following link

http://welcome.hp.com/country/us/en/support.html?pageDisplay=drivers

I would probably attempt autodetection first (using the evo p4, if possible)

Then by category second

Then by actual model number third --

EVO P4 seems to be missing a center portion that would fully identify the model -- the first option the site will help you determine the answer -- the second option will have list boxes with appropriate responses to help you identify the correct answer.