HOW DO YOU CHANGE CAMERA PICTURE FROM FRONT VIEW TO BACK VIEW

Would be better if you provide camera model. Anyway, there must be a button with a symbol of a point between round or square shape, showing right direction. Click this button to view photos. If you have DSLR then check if you have pressed "DISP" or "Lv" button this may change display settings.

Mine has a little camera icon in the upper right of the view finder picture under which is a round arrow. If you touch this icon the camera will switch from front to back and vice versa.

Couple of years ago I had the same problem. Panasonic service replaced me the LCD panel of it. After several months it has been dropped again, same failure again. I could not believe that the LCD went wrong again, so disassembled and noticed that the ribbon cable of the LCD had a contact failure. Could fix it myself. There were a couple of DIY videos on youtube...

What name brand memory card do you use? I recently discovered myself that Nikon only supports SanDisk, Toshiba, Panasonic and Lexar. Try taking out the memory card and take pictures without the memory card inside the camera. If you can view the picture saved onto the camera memory then you will know that all you need is a new memory card, with one of the above mentioned name brands. Hope this helps.

Hello and Welcome to fixYa!

You can change the webcam settings, by going to messenger>preferences>webcam broadcast> camera settings.
In camera settings you can increase the brightness and exposure to endure better and brighter Picture/video quality.

Have a good day,

Concerned.

you cant, once you set the pictures to black and white it overwrites the originals. Next time you need to change the colors duplicate the picture and work with the duplicate... This is what i do on mine.

You can turn it off. Turn on the camera, press 'view' (arrow pointing right abover the menu button). Wind the round selector through the various options and leave on the screen which displays the image info on it at the bottom - the shot count is in the top right hand corner. There is no full screen option without.

The lens assembly and or microprocessor has failed.
Contact Olympus
Good luck, Paul

when in standby hold down the power button for over 4 seconds, it runs the optimal screen settings menu, hope this helps.

Can you check the card by a car reader in the computer- or some one else computer? Failing that Format the card in the camera then have a try Come back let me know how you get on