Question about GE Refrigerators

1 Answer

Ice dispenser funnel

How do I remove the water/ice dispenser panel? Do I need to remove the stainless door panel?

Posted by Rene on

Ad

1 Answer

Paul G

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 161 Answers

No it should pop out .
before you go nuts use a mirror and a torch and have a really good look, they are normally popped in with either a quick release clip or a spot to use a flat screw driver

Posted on Jan 15, 2014

Ad

3 Related Answers

Anonymous

  • 77 Answers

SOURCE: remove faceplate in door of a kenmore frig.

If you look at the bottom of the facial plate, underneath. There are two slots to insert a flat screw driver. You should be able to access everything once you take that off. Good luck

Posted on Apr 24, 2009

Ad

Anonymous

  • 2 Answers

SOURCE: LG LRSC26925TT ice dispensing funnel broken

Yes. But LG came out with a new frame for the funnel. So you have to order the funnel and the frame which is installed through your front control panel. Good Luck I just did it.

Posted on Jan 05, 2010

DeBruce

Bruce

  • 145 Answers

SOURCE: Can I get a replacement door for my GE Profile Refrigerator

Warners Stellian in Minneapolis can help.
For cleaning DeBruce Polish is the answer.
DeBruce Polish is Odorless, Non-Toxic and non abrasive and perfect on stainless steel, glass cook tops, polished granite marble and more. DeBruce Polish is Odorless, Non-Toxic and Non Abrasive. DeBruce is perfect on stainless steel, glass cook tops, polished granite marble and more. We buy DeBruce at debrucepolish.com.



Posted on Mar 05, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag mfi2568aes control panel


If the refrigerator water dispenser is not working the water supply tube in the door may be frozen. This will be difficult to track down. Look for a connection point at the bottom or top of the door, try removing the hose and blowing air through it and out the dispenser. Next it could be the water valve that sometimes has twin valves for ice and water combined, third is low pressure into the line (bad main valve) or clogged filter... you need about 20psi for function. Last is the door switch, when the freezer door is opened the freezer door switch does two things, it turns on the light in the freezer and turns off the ice and water dispenser. If the door switch fails the dispenser will not turn on. The switch can be checked for continuity with an Ohm meter. If it doesn't have continuity it should be replaced.

May 16, 2014 | Maytag MFI2568AES Stainless Steel Bottom...

1 Answer

Water dispenser very slow


Check the filter and replace if necessary.

Oct 26, 2012 | LG LMX25981ST Four-Door French Door...

1 Answer

Need to replace front ice and water dispenser panel


You have to remove the inside of the freezer door to get to it.Be careful not to break the pins that hold the door together.

May 19, 2011 | Whirlpool 25.4 Cu. Ft. Side-by-Side...

1 Answer

Electrolux side by side door refrigerator. White


This can be pulled out of the door and replaced with new tubing.You may need to remove the front dispenser panel in order to get the tubing out of the dispenser.

Once you do that then you can pull the remove the tubing and replace it with new line.

Jan 01, 2011 | Electrolux 25.9 Cu. Ft. Side-by-Side...

1 Answer

LG refrigerator - Need help replacing a part in the door.


How to install part ac110-115v for lg refrigerator

Jul 10, 2009 | LG Refrigerators

3 Answers

Jenn Air JCD2389GES ice dispenser problem


You could have a layer of solid ice at the bottom of your icetray. Remove icetray. Remove any ice in bottom. Reinstall. Be careful there is a connection on the rear of the icetray, you may have to turn it to get it to mesh correctly. Fill with ice and it should work fine. Good Luck.

Feb 24, 2008 | Jenn-Air JCD2295K Stainless Steel Side by...

2 Answers

Lg lfx25960 Ice Dispenser


I had the exact same problem on my LG LRSC26940 and was able to fix it fairly easily. First remove the Ice Funnel by pulling down on it. Then remove the entire dispenser panel by getting your fingernails underneath and pulling out. Disconnect the electrical connecter to the front panel PCB. Remove the 4 screws attaching the bracket that the Ice Funnel connects to. This exposes the solenoid that opens the Ice Door flapper. In my case, the electrical connections to this solenoid were bad. I simply scraped the spade terminals on the solenoid off with a screwdriver and crimped the connectors with a pliers. I put it all back together and it is working fine now.

Dec 12, 2007 | LG LFX25960ST Stainless Steel French Door...

1 Answer

Ice and Water Dispenser Funnel


This diagram may help some.. should be a molding thats goes around outside of dispenser.. should be able to pop off and get at screws u need to get at...to remove and get at what u need too

http://www.partselect.com/Schematics/GE/00116598i01.gif

Nov 01, 2007 | Refrigerators

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

gbob59

Level 3 Expert

3063 Answers

Cindy Wells

Level 3 Expert

6197 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...