- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Switch-off your phone. 1. Press and hold 3 keys; Green dial key, *
Star key, no. 3 key on keypad and then press the power on/off to
swtich on the phone. Remember, do not let go the 3 press and
keys until you see a formatting word screen show! 2. After a
minutes when the Full phone formatting completed, your phone
back to original system and factory settting.
If it's vibrating it is getting power so that can't be the problem. Black screen would indicate a bad backlight usually.
Overall it sounds like your phone has become defective. There to cheap to have repaired, your better off replacing the phone as theres little you can do to fix that. I checked the troubleshooting for this phone and there are no fixes for these problems.
Post back for further assistance, thank you for choosing Fixya!
It sounds like the backlight in he LCD display has gone bad in the phone. Most displays now have an integrated backlight, so the entire display will need to be replaced. Its not considered to be a user replaceable component. Unfortunately, you'll have to take it to be repaired. The fact that you said it was "fading" before it completely went black tells me that it was going bad and about to fail.
the white and black screen issue on the Razr V3xx can be a bad LCD. If the LCD is good then the issue is on the main board. The most common failure is broken contacts on FL6505 and FL6504. resoldering might hold up for a while but replacement is the best option.
the side view clearly shows the damage to the filter. this is only visible after the solder is removed.