I have a brother hl 1230 and we had a power falure the other night (power went off and then came back on again at low power) now all the lights are flashing. This happened once before and I was told how to reset it, but I didn't write it down - help.
Resetting the printer should clear the flashing leds (flashing lights.) This issue is listed by Brother. Click here to view
How to Perform A Factory Reset:
1. Turn the printer off.
2. Hold in the circular button on the front panel of the printer.
3. Turn the printer back on.
4. When the DRUM light is lit by itself let go of the button. Hold in
the circular button on the front panel again. Once the Alarm light comes
on, let go of the button. This has performed a factory reset on the printer.
If the alarm continues, the printer may need service.
I’m happy to assist further over the phone at https://www.6ya.com/expert/lou_afa492c634393790
1,604 views
Usually answered in minutes!
how too do that man......!!!! :D
HELLO
i want ask you
how to reset toner brother hl 1110
×