Question about Mitsubishi WS-65908 TV

1 Answer

Re:problems i have this mitsubishi 65 inch television model number ws-65807 the problem is i turn it on and 3seconds later the power light goes out no picture comes on and when the power light goes i i hear a click somewhere on the cicuit board..please help..

Posted by snead on

  • turbojoe23 Jul 19, 2008

    Well this morning the tv was working fine then this afternoon my wife went to turn it on and it turned it self back off within like 2-3 seconds. We have had problems with the tv turning off after it was on but it was very unpredictable when it was going to do it.

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 52 Answers

Your TV is probably shutting down due to excessive current draw. Replace the filter capacitor in the power supply and cross your fingers. This will be a large, tall, and round shaped object near the location where your power cord goes into the TV. It has two pins and one is positive and other is negative. Do not get them crosses when installing new part. keever

Posted on Mar 02, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a ws-65807. the power comes on but no picture or sound


I had the same thing happen to me. There was coolant leaking on the board. I cleaned it off and replaced three pico fuses and all was well. I had to go back in later because there was more leakage. That time I just cleaned off the board and installed a drip tray. I am sure I will get some more months out of it. Did you get it fixed or did you want some more help with it?

Dec 06, 2011 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

I have a mitsubishi ws-65807. I have no picture or sound. It used to work.


try the self check this model has, try to turn set on and when green power light comes on and goes off press and hold both the menu and input buttons on the front of the set at the same time for at least 5 seconds and then release both buttons.

This is a self-check this model has----the power light will then blink a two digit error code like 2 blinks, 2 blinks, a pause and then repeat it several times.


The idea here was to narrow down what area the problem is in.

Let me know with a comment here and I will tell you what the error code you found means.

SD TECH

Apr 12, 2011 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

My Mitsubishi WS-65807 will not power on. Completely dead...


DOES POWER LIGHT COME ON AND THEN GO OFF/

THE MORE YOU TELL ME THE BETTER i CAN HELP YOU.

sd tech

Nov 06, 2010 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

I have a mitsubishi dlp 915p020010 and when i turn it on the green light gomeson to indicate that i have turned the tv on but i dont get a picture or sound then about 30 seconds later the light turnns red...


Power supply and DM caps need replaceing very common with the V26 DLP's The V26 DM/Power repair kit from www.tvrepairworld.com should solve that and the kit also contains instructions for the repair.

Aug 27, 2010 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

Mitsubishi WS-65807 blinks '22'


I replaced the pico fuses and the convergence IC's. fuses poped right away code 22 . Further inspection of the board showed the coolant had leaked out of the center projector and fried the board. Not willing to pay $300. Passed it on to someone else

Oct 01, 2008 | Mitsubishi WS-65907 65" Rear Projection...

1 Answer

Mitsubishi ws-65807 v17 chassis


go to this websight leave an e-mail with your model number and let them know you need a signal board and they should be able to help you plus there prices are very reasonable and they also offer free online tech support to their customers
http://servicemanuals.vstore.ca/

Apr 29, 2008 | Mitsubishi WS-65807 65" Rear Projection...

2 Answers

Mitsubishi ws-65807 no sound or picture


Check for coolant spill in corner of signal PC board = from leaky
CRT seal = bad CRT...........................T.

Apr 24, 2008 | Mitsubishi WS-65807 65" Rear Projection...

1 Answer

Mod#vs60607 tv


Check for wet area on signal PC board = leaky CRT seal.
................T.

Apr 15, 2008 | Mitsubishi WS-65807 65" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-65908 TV Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76287 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...