Nokia 3230 screen goes blank after a few minutes of turning on.
My Nokia3230 when first turned on, gives normal display but after a few minutes the screen goes white (the display vanishes). If the set is turned on later after a day or two, the screen again gets blank after giving full normal display for a few minutes. Except for the display, the set is functioning OK for receiving the incoming calls and forwarding the outgoing calls as well the messages. Please advise. Sincerely, (Yamin Khalid) [email protected] I HAVE NOKIA 3230 MY PHONE SCREEN IS AUTOMATICALY BLANK WHEN WORKING OR IN IDLE CONDITION
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1,the color starts to go out, it become the white and black ,
2,then,the projector running off after only a few minutes,
it is a general issue:the inductor need to be cleaned
Use a cotton swab moistened with alcohol to clean the inductor.
the inductor (Sensing element),is near to the Color Wheel.
the industor : is a black little element,as little as a sesame seed
any questions, feel free to ask me
have a nice day!
Jerry Lampdeng Limited
When you say you move him, do you mean lifting the unit and moving to another location or just moving the lid (changing angle of the lid/lcd)?
If changing the angle of the display gives you black/white screen, you may be having problem with the LCD cable, it might be loose or defective. But if moving the unit to another location gives you the black/white screen, one component of the unit might be loose. Either you need to properly reinsert the memory of the harddrive. If these simple steps will not resolve the issue then you might need to check the whole motherboard including the connection to the LCD.