Switch input without remote - Sanyo DS19310 19" TV

Without knowing the make and model it is difficult to answer your question accurately. In general you would change either the source or input option. Usually the antenna option is called TV.

Just get a cheap universal remote, and program it to the TV. Some TVs don't have the dedicated buttons to switch inputs, without the remote.

The button that switches from AV2 is the "Input" button, on the lower right side of the TV. But keep in mind, another Audio/Video source needs to be plugged into another input (located on the back of the TV) in order for this to work. The TV has to recognize multiple input sources to switch between them.

Hi the only slight chancer you have of doing this without the remote and this will only work with some tellys is to have the telly switched on then the device you have connected to the video input have this switched off at the wall then with the telly on switch the device on your trying to get the telly to pick up now some tellys will pick up the signal and go to that input channel, if how ever this dont work your going to need to go out and buy an all in 1 remote, these remotes cost next to nothing to buy you can get them off the well known auction site or from your nearest cheap shop such as discount stores that sell goods for next to nothing these remotes will work on all tellys and would solve your problem if the way i told you dont work.

Im sorry their is no easy way to get it to change but without the remote your pretty much stuck unless on the telly you have a button that looks like a square with an arrow running from left to right if you have this button then pressing this wil change the input source for you, if you dont have this then the only option would be an all 4 1 remote.

let me know how you get on or if you need further assistance ok

The short answer is you can't. Most sets now require the remote control, which has a "source" or "input" button that you need to press. To make matters worse, a universal remote often (usually, in fact) won't have the right codes to switch inputs. There are vendors selling original replacement remotes, but they can be pretty costly.

The longer answer is that on a few TVs you might find a source selection through the on-screen menus. If your set has front panel menu control. Some do, but often the functions are very limited. On a few models of RCA sets you could switch to AV inputs using special channel numbers (00, 98 or 99) but these were older models made when cable systems had fewer channels.

Without knowing your brand and model I can't tell you more. But it's almost certain you'll need a remote. Hopefully you can find a universal remote that will work for you.

try changing the channels until you reach 2 and go past it.

Unfortunately Orion has no other way to switch the inputs but with the remote. www.remotes.com has an original remote. Thanks

yes as long as it has the button for it.look for tv/video button.if none, then buy a remote like a universal remote is the only option.

Hi

please use the menu button in your front panel then search the video, Air, or Cable selection!

Thanks!

If you have lost the remote, go to any electronics store and buy a universal one. I have programmed many generic remote controls, and they all work fine for adjusting the video inputs. Not all television sets allow their video inputs to be switched without the remote. Most likely you will have to buy a replacement.