Question about Samsung HLN567W 56" Rear Projection HDTV

1 Answer

HLN567w-won't start amongst other things

-Turns off by itself, won't start,but you have sound. High squeeling noise from color wheel. Unit freezes up, sound continues correctly, but screen is frozen-black/white pixelization-like photo negative. Won't turn off, when this happens, unless you unplug.

 

parts replaced and outcome- Lamp and color wheel- Unit is quiet, but still doesn't start up every time, and shuts off on it's own and does the freeze up thing. Worked this way for about 2 weeks, shut off, reset etc. absolutely ridiculous. switched back to the old bulb, worked the same, so my guess is their both good and something else is bad. Now.......it won't start at all, get the chime, but lamp never comes on, and you get 3 blinking lights. I'm not hearing the color wheel at all, I could hear it, faintly, for the 2 weeks that it kind of worked. Please help if you can.

                                          Thanks,

                                         Jeff Couch

Posted by hrabosky on

  • hrabosky Oct 23, 2007

    Anybody out there still trying to figure out this whole Samsung DLP fiasco, or have we all been beaten down long enough, to give up. Obviously, this technology isn't repairable. Everybody's chasing the next part, with a very low success rate. If they(Samsung) knew what the fix was, they would be shouting it from the mountaintop. They have no answer, except that we blew a bunch of money, on something that, to them, is disposable. I'll keep trying to find the solution.

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 39 Answers

HEY HRABOSKY,ONE COMMON ISSUE AMONG THE OLDER SAMSUNG DLPS' ARE POOR/DEGRADING SOLDER JOINTS ON THE DIGITAL PC BD.(THAT'S THE BIG SHIELDED ONE FACING THE BACK).I'VE HAD GOOD LUCK RESOLDERING ALL PLUG INTERFACES AND SET WAS FINE. JOE TV

Posted on Nov 16, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HLP4663wx/xaa Fan or Color wheel making noise? I first noticed it within the last week making noise when turning the set off. Now it's continuous. Could hear it slowing down on power off, constant...


A fan like noise is 98% of the time the color wheel.

Wheel turns at over 12,000 rpm and common failure is "fan like sound or even grinding sound".

When these sets first came out if the high pitched sound started women who have better hearing in that range usually hear it first.

If wheel really fails it will shatter and set will not come on----a grinding sound may be noticed just before total failure.

SD TECH



10_17_2011_10_36_47_pm.jpg

Oct 17, 2011 | Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

Making high pitch whine or squeeling


Check the color wheel and any fans running on the unit. The color wheels make a high pitch whin right before they quit as well as the cooling fans.

Jul 01, 2011 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

My samsung HL-S5086W has a high pitched buzz that is present when muted, and continues for 2 or 3 seconds after you power off. Any ideas? I heard if it continues after power is off, then it is a fan, not...


Samsung BP96-01579A Color Wheelno the fans will not produce a high pitched noise. they will ususally produce a dull noise because they dont spin anywhere near as fast as the color wheel. the color wheel will start up before you see video and stay on for few moments after power down. if the fans were faulty the tv would give you message on screen.

Dec 22, 2010 | Samsung HL-S5086W 50" HDTV

1 Answer

A noise had been gradually increasing from a grinding sound to a high-pitched whine. COntinues until the screen is completely off. Sounds like a fan motor may be out of lubrication.


THAT TV HAS WHAT IS CALLED A COLOR WHEEL WHICH SPINS AT VERY HIGH RPMS AND CAN MAKE HIGH PITCHED WHINING/GRINDING NOISES IF A FAN WAS BAD THE TV WOULD SHUTDOWN AND THE SOUND WOULD BE MORE DULL SOUNDING.

Dec 17, 2010 | RCA Scenium HDLP61W151 61 in. HD-Ready...

1 Answer

I have a samsung hln507 and there is no picture. we start the tv, it has a high pitched whining sound, the fan and the color wheel are spinning, but there is no picture. after about 10 seconds the tv turns...


The colors wheel is dead.That why,u hearing high pitched whining sound.The colors wheel is spinning off of is motor axis and grinding it sides walls,that where the high pitched whining sound came from.Hire a tv Tech. for the colors wheel changing,because it requiring to take out alots of the machanicals parts itself,before u can come to the colors wheel itself to change it.

Oct 16, 2010 | Samsung HLN507 50" Rear Projection...

1 Answer

Samsung DLP HL-R4266W..no sound or picture. TV is completely dead


Assuming the noise is a high-pitched whine, then yes, it is the color wheel.  If the color wheel goes out, the TV will turn on for a while, then turn off when it can't establish color wheel sync.  The color wheel has to be in sync with the mirrors on the DLP, so if sync can't be established, the TV turns off.
You can order a new color wheel from Sears or partstore.com (among other places) and replace it yourself, if you are so inclined.

Jan 24, 2009 | Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

Pioneer PD-F505 Cd Player - The player picks up the CD and it starts spinning. A high pitch squeel sound starts as soon as the CD starts to spin. The unit spins the CD for about two to three seconds and...


Sound like laser assy defected in any case you need a Technician from Pioneer or they are trained by Pioneer is very complicated to remove the laser and replace it you need an osilloscope to aligment a new laser and special disc to do that. It might not worth to repair it, the laser itself a bout $110.00 Aus

Nov 30, 2008 | Pioneer Audio Players & Recorders

1 Answer

Samsung DLP HL-R5667W


Your set has a defective color wheel. This is the noise you hear and why the set wont even come on now. The colors were bleeding because the color wheel was getting stuck and when you hit the set you unstuck it. You need to call a tech to put in a color wheel the part is about 100 dollars plus labor.

Feb 05, 2008 | Televison & Video

1 Answer

No picture or sound after replacing lamp


Possible bad color wheel...

Pull the lamp out & look inside where the lamp sends the light-

does the color wheel look defective? If so,replace it.

Or, the lamp ballast may be bad.After that,usually replace

complete engine.

Oct 19, 2007 | Samsung HL-R6167W 61" HDTV

2 Answers

Horrible noise


it is the color wheel i have a similar problem and am looking for the part, the color wheel is a small electric motor that spins at a high speed and it can go bad. which will lead to the horrible squeel/hum/buzz.

Apr 24, 2007 | InFocus ScreenPlay 4805 Multimedia...

Not finding what you are looking for?
Samsung HLN567W 56" Rear Projection HDTV Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76287 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...