Question about Edu-Science Toys

Open Question

Eduscience 3 in 1 hydrolic set

Cherry picker won't assemble

Posted by Anonymous on

Ad

3 Related Answers

Anonymous

  • 87 Answers

SOURCE: Serpentine belt

yes the front engine mount must be removed use the jack that comes with the car and a wood block 2x4 works great

Posted on Jun 08, 2008

Ad

weekend_mech

  • 58 Answers

SOURCE: motor mount

put a jack under motor to support the motor then replace. Might want to put a 2x4 and some rags or blanket between motor and jack to prevent damage

Posted on Mar 28, 2014

Ad

Randy Ohler

  • 14585 Answers

SOURCE: Clutch replacement without a cherry picker

Drop the transmission out the bottom. No year make or model. All the ones I do, come out from the bottom. way to much work to pull the engine.

Posted on Aug 24, 2015

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What do i need to replace the motor in a 1998 chevy cavalier


Floor jack, jack stands, cherry picker, common sense, mechanical ability, basic hand tools, service manual helps.

Jun 08, 2015 | Cars & Trucks

1 Answer

How to remove the engine


The task requires mechanical skills and hardware such as a Cherry Picker. Without the proper tools; you cannot manage this function. In addition, you have to remove every attachment, fuel lines, support brackets, covers, plates, mounting brackets, electrical, and misc. devices. Then reassembly is difficult and you need a computer to reset the parameters set forth by Buick.

Mar 30, 2015 | 2009 Buick Enclave

1 Answer

How do I replace the motor mounts on my 2001 Toyota Camry Solora xle v6


Ok, first off apply E brake. Second, locate motor mounts usually on side bottom, connect to frame. Third jack up car place jack stands. Fourth,disconnect all wiring, maf, pretty much anything and everything that will get in way. Fifth, grab cherry picker, connect engine to cherry picker. Sixth, disconnect engine from trans, or leave connected but might be more difficult for some. Seventh,unbolt engine from mounts(usually 3or so bolts on each mount), do not rock engine, raise cherry picker(or crane some call it different)when tension on chain slowly rock engine. Should pop out unless you missed a bolt.

Feb 20, 2015 | 2001 Toyota Camry Solara

1 Answer

To replace oil pan gasket, lift with hoist (cherry picker) or jack from under


Lift it from the top. You can chain from the exhaust manifold if no hooks are present on the block.

Jan 10, 2013 | 2005 Dodge Dakota - Quad cab, 5 3" short...

1 Answer

Fuel pump 2001 silverado


You can either drop the tank, if its near empty that is; but it hardly ever works out that way. When I did mine I took the bed off. Unbolt I believe 8 bolts , wiring for taillights, and (I used my cherry picker) lift the bed up. The pump assy goes into the tank, some twist out, some might have a couple screws holding it. I don't remember. Assembly is the opposite of removal.

Oct 17, 2012 | 1998 Dodge Dakota

2 Answers

Can't remove the alternator! How do you remove the alternator on a Ford Focus 2001 without unbolt the engine mount?


The other option, but be warned could cause damage to the motor mounts, is to use a cherry picker to lift the engine up enough to clear the alternator from the engine bay.

Sep 11, 2010 | 2001 Ford Focus

1 Answer

On a 1997 chevy astro to pull out the engine does it come out under the van? theres no way to bring out thru the front with out haviing to cut,


Comes up and out of the 'Dogbox' with a cherry picker. (Can you say No Fun?)

You go through the side sliding door with a cherry picker.

Take the engine cover loose, and remove it. Now attach your lifting cradle, (Or chain with bolts so that the chain doesn't slide in the lifting hook), to the top of the engine. Lift up and back. Keep working it up, and out, of that small compartment. Use three people, and BE CAREFUL! Always have an exit planned in case something goes wrong. Stand away from the engine, not crowded down in there as you remove it.

Jul 12, 2009 | 1996 Chevrolet Astro

1 Answer

Easiest way to remove bed on 1988 s-10


pull all bolts get a engine puller or as i call it a cherry picker and hook one chain to the hook by the passenger side closest to the cab and the other side to the driverside by the tailgate.then get another chain and do exactly the opposite so that you make an X the hook the cherry picker/engine puller to the center and lift slowly..

Dec 01, 2008 | Chevrolet S 10 Cars & Trucks

Not finding what you are looking for?
Toys Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Edu-Science Toys Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Tom Chichester

Level 3 Expert

60200 Answers

ray gallant

Level 3 Expert

70776 Answers

Are you an Edu-Science Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...