Question about iLO 3200 32 in. LCD Television

Open Question

I have sound but no picture on my iLo TV

I have only had my TV for about 6 months and now after it has been on awhile I have no picture but still have sound.  If I turn the TV off and back on I will have a picture for a short period of time then the picture goes out again.  If I just wanted to listen to my TV I would have bought a radio.  Can you help me..........please

Posted by Tootsie5972 on

  • 1 more comment 
  • Anonymous Nov 03, 2007

    when i turn my tv on the picture comes on for a short while and goes out i unplug the tv for a while so i thouhgt it would come back on but when it came back on the problem still was there how can i solve this problem i only had my tv for 6 months what can i do to solve this problem

  • natedavis May 07, 2008

    sound but no picture

  • Anonymous Jun 20, 2008

    we have a 42 inch LCD and we also have the same problem. I turned the tv on and an hour or so later the picture faded to almost nothing but we still have the sound. Any suggestions where we can take it and get it fixed?

×

Ad

5 Related Answers

Anonymous

  • 62 Answers

SOURCE: 32" lcd ilo tv

Call 800-726-4405 - but you will have to ship the television to California at your expense to have it repaired or replaced.

Posted on Mar 30, 2008

Ad

Anonymous

SOURCE: 42 Ilo plasma tv

Ilo 42" plasma TV ; Poor sound ; cracking & will loose sound . . Looking for original replacement speakers in the TV.

Posted on Jul 01, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: ilo 42"widescreen lcd tv

I hooked a sylvania 220sl8 dvd/cd/vcr, The vcr works, the dvd does not. Why?

Posted on Oct 18, 2008

premtech

William Rayburn

  • 934 Answers

SOURCE: Horizontal Line through middle of TV screen

That sounds like simple ring-cracks in the vertical circuit, most likely the vertical Ic itself... On the printed circuit side of the Tv look at the vertical Ic and examine it carefully under some magnification where each pin of the Ic solders to the board. See if you can find any cracks in those solder connections.
Bill

Posted on Feb 04, 2009

Anonymous

  • 1 Answer

SOURCE: My ILO tv will not turn on. It has power. Is

i had the same proble..there is a 120v 4 amp fuse below where the power cable connects to the circuit board chances are this is blown

Posted on Jan 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toshiba HD ready TV ct 90158 makes high pitched sound


A high pitch sound can be a capacitor losing power it would sound a bit like a fire work. most have back up on the board but it put more pressure on them the more times you use the tv. would check them and replace. all of them can be 5 in a row in some models.

Oct 23, 2013 | Toshiba Televison & Video

1 Answer

Blinking/standby timer


Sony Trinitron TV. Worked well last evening. Now picture won't go on. When power is turned on, standby/timer red light flashes, but picture or sound does not work.

Jul 01, 2009 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

2 Answers

Fuzzy picture on my 42" akai lcd tv


Check the menu ,,it should have a option ,,called convergenge ,,that realigns the colors,, and some tvs have geomagnetic correction,, good luck

Oct 05, 2008 | Akai LCT3201AD 32 in. LCD Television

2 Answers

Sound but no picture


it's the T-con board attached to the lcd panel

Jul 29, 2008 | Samsung LN-S4692D 46 in. LCD HDTV

1 Answer

I have a 50 inch hitachi ultravision that has no picture or sound but power light is on


Probably a 'cold or detatched' solder joint on a component on that perticular circuit board you are 'wedging' with a plastic rod.

Apr 16, 2008 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

Slow to come on, picture flashes black, 32" SONY tv


blankenship, the "IK circuit" is blanking your screen, only "fix" is temporary, remove back of tv, and on rear right side (facing into the back of the set) you can see 2 philips type plastic screws mounted on the flyback transformer, one is focus the other is screen, do not adjust focus , turn screen control clockwise slowly until you get white retrace lines on screen, then turn counterclockwise until retrace lines disappear, this increases drive from tube to IK circuit, will last anywhere from 6 months to 18 months and then it`s replacement time, questions? e-mail me back. good luck, BMW Rider

Jan 11, 2008 | Televison & Video

2 Answers

Samsung 40 no picture


If it is only 6 months old you probably still have a warranty. This is definitely a hardware issue, and unless you are comfortable taking your new TV apart, I would contact Samsung for repair.

Dec 11, 2007 | Samsung LN-S4051D 40 in. LCD Television

1 Answer

Apparent problem with red projector?


service manual here
http://www.eserviceinfo.com/
I would not replace one stk but all....
more info here:
http://www.digitalhome.ca/forum/search.php
http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Aug 23, 2007 | Toshiba 55H70 55" Rear Projection...

6 Answers

VIZIO 42" Plasma HDTV


i have a vizio p42 and i have sound but no picture i have tryed to reset it but nothing works

Nov 24, 2006 | Vizio P2 42 in. HD-Ready Plasma Television

Not finding what you are looking for?
iLO 3200 32 in. LCD Television Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4808 Answers

Are you an iLO Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...