Not able to open links on webpages

With your bank? Each bank has a different procedure. Review the online help or FAQ section on the company webpage.

Open the webpage of your bank and look requisites to get ausername and password. Probably at some momnt you should call your banki's on line service personally so they should exlain you their particualr security procedures. Procedures may be different for each bank.

the link has been broken in the webpage, the links will have to set right, so the browser needs to look.

It sounds like a problem with the links on the webpage. Contact your bank to see if others are having the same problem, and let the bank know what's going on. If you have a laptop, they might want you to bring it in to show them exactly what's going on, although if it is a webpage problem, they should be able to tell by accessing the site at the bank. Good luck, hope this helps.

If you are trying to reconcile to your bank balance, you should not be reviewing the "deposit detail" report.

1) Go to "Banking" then "Reconcile"
2) If the "Opening Balance" is incorrect, then close the "reconcile" window and go to "Reports" then "Banking" then "Bank Reconciliation Discrepancy" report. (This report will reveal what changed after your last successful reconciliation).
3) If the "Opening Balance" is correct, then you want to press "continue" to focus on the bottom of the window, which reveals "total deposits marked as cleared". If you have duplicates, you will see them on the right side of the screen, but the ultimate goal is to have a "Deposits Total" (in QuickBooks) that agrees with the "Deposits Total" (per Bank Statement).

The "Deposit Detail" report is a "Journal Report" to show you details of historical deposit records, Has nothing to do with "reconciling" your current bank balance.

Dear sir good day In General, you can debug the Network Setting of the computer following these steps.

Step One. Check the Network parameters in the Computer's Device Manager. Make sure that the drivers are installed correctly; there is No IRQ conflict, and No Ghost installation. http://www.ezlan.net/faq#ghost

Step Two Verify Basic network setting in the OS: http://www.ezlan.net/Installing#verify
If the above two Steps indicates that every thing looks good but functionally it does not work.

Step Three. Check (and repair if necessary) the Socket Layers, Winsock, and or refresh the TCP/IP Stack. http://www.ezlan.net/clean#refreshnet

If need to Reinstall; Log to this page it have a lot of links to instructions for Windows Network Installation - http://www.ezlan.net/Installing.html

:D thank you

http://forums.tdiclub.com/showflat.php?Cat=&Board=UBB3&Number=668340&Forum=&Words=lock&Searchpage=0&Limit=25&Main=667362&Search=true&where=bodysub&Name=5297&daterange=0&newerval=2&newertype=w&olderval=&oldertype=&bodyprev=#Post668340

try this http://forums.tdiclub.com/showthread.php?p=730184

use your url link enter what webpage u want if not get connect network server

Review online guide and trouble shooting for suggestions.

The manuals,online guide and trouble shooting sections could help you resolve your problem. Contact support has a chat facility on some pages that may help.

Click this Link

Under Select a Product Range
Choose Laser Printers on the webpage
Under Select a Product
Choose Aculaser C1100 on the webpage
Under Select an OS
Choose the operating system on the machine where you will install the printer on the webpage
Click Confirm Selection

The manuals and documentation link will allow you to download manuals that were on your CD ROM

you may want to bookmark the online guide, if present, to help with future problems -- that probably was not on the CD

Click the back button on the browser

click the Drivers and Software Link

This allows you to download software files that were probably on your installation CD

Click the back button on the browser again

Trouble Shooting and Contact Support could be an interesting link in the future too when and if you have problems.

I hope this helps