Puff of smoke from display

Check for bursted electrolytic capacitors at its main power supply regulator board. It will be best to replace the board as card basis, rather than making any 'surgery' to it. If you wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic /Timeslide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name / model number / IC used, in the search box at the top right of the display window.

The circuit board or display board is burned out. There is nothing you can do, take it to a Brother repair shop. Ask for an estimate, it might be expensive.

It might still be under warranty... Look at you bill of sale and check your warranty regarding electronic parts.

Sounds like the timing chain or timing belt stretched, throwing off the valve timing, and then broke.

Sounds like you need a new wick.

Drag the file you are trying to put into the dock to the right of the silver line at the right of the dock. The file you want to delete, let it disappear in the 'puff of smoke' and then go into Macintosh HD and find the file and drag it over the trash icon. I hope it works!


Thanks, Logan

you have a burnt board thats going to need replacing.that was the pop you heard and the puff of smoke.

sounds like the ignition switch shorted out like a wire was rubbing and im sure it blew the fuses your going to replace the egnition switch and repair any wire thet is bad and replace the fuse

white smoke is antifreeze try checking the compression

Hi

Please check TV's control board main capacitor for worn out.

Thank you.

The fuse will be a white or gray ceramic fuse, and you really can't tell if it's blown without actually measuring it. If a new fuse blows when you hit START, you probably have a shorted high voltage capacitor. If you have replaced the fuse and still have no display, then it sounds like there's a problem on the control board. The control board has a built-in surge protector which can short (and smoke) and when it does, it will cut the power to the control board, but not blow the fuse. We repair these nationwide for only $39.95 postpaid. If you or a friend want to check it out or send the control unit in for serivce, we have *critical* safety and disassembly info at our site, which is linked at our listing here on FixYa: http://tinyurl.com/yzjozk