450 windows 7

1st You download Webcam Driver.
Amilo web cam draiver After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.
Ezonics Camera Drivers for Windows XP Vista Windows 7

Any "plug-and-play" device with a USB interface should be supported by Windows XP/Vista/7/8. Try it!

pentru Vista si 7
http://support.amd.com/us/gpudownload/windows/Legacy/Pages/radeonaiw_vista32.aspx?type=2.4.1&product=2.4.1.3.13&lang=English
pentru XP
http://support.amd.com/us/gpudownload/windows/Legacy/Pages/radeonaiw_xp.aspx?type=2.4.1&product=2.4.1.3.13&lang=English

Hi,

The VGA Adapter that is installed in this computer is Intel 915GM. As it is, your HP Compaq NX6110 was designed for Windows XP.

Even if your laptop's processor meets Windows 7 requirements, some of its components might not, as such your laptop's VGA Adapter. Intel so posted themselves that Windows 7* drivers are not available for the following older Intel® graphics controllers. And one of them is your kind of VGA Adapter. You may double check this information from the HP Website through this LINK.

I suggest you downgrade your Windows 7 back to Windows XP so you can maximize its capability and use it as it was designed for.



I hope this works for you. Kindly reply/comment for further assistance. Good Luck!


Thanks for using Fixya!

Mongkey
DELL Tech ID #456563
TIPS: Is your computer slow? This might help
http://www.fixya.com/support/r8158906-diy_manual_pc_tune_up
(for Windows only)

Pe aceasta pagina:
http://www.microsoft.com/hardware/download/download.aspx?category=ICE
Selecteaza --> Webcams --> VX-7000 --> selecteaza sistemul de operare si limba --> vei fi redirectionat spre pagina de descarcare.

Mult succes!

Daca ti-am fost de folos, te rog voteaza-ma si acorda-mi un rating.

My Iiyama Vision Master Pro 450 works with Windows 7 when connected with a VGA video cable that has 5 BNC RGB connectors that attach to the back of the Iiyama monitor. No driver install was needed; Windows 7 shows my Iiyama monitor as a "Generic Non-PnP Monitor" with 1024x768 resolution.

Windows 2000 and XP and Vista and 7 have the correct device-drivers for CD-ROM devices.

What are the symptoms of your problem?
What error-messages are produced?

Is it just one CD-ROM disk that is giving you the problem?
Have you tried that disk in another computer?

Unfortunately the printer you are trying to install is not supported by Windows 7.

http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20LaserJet%201000%20Laser%20Printer&v=HP&uid=Q1342AABA&pf=0&pi=0&s=hp%20laserjet%201000&os=32-bit

If HP doesn't write a driver for Windows 7 for your printer no one else ever will.

Robert from Blitware

You can download printer drivers from -
Canon drivers download
http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct
You can also try this WEB site -
Printer Drivers - XP to Windows 7
www.Paretologic.com/Drivers_printer