Reset m2070 can't find counter resetter

Hello,

If you want to reset the printer counters, you can use wic reset tool.

The waste ink counter is full, you need to reset it. First, download the resetter PCM_servicetool (.rar) Step 1: enter in service mode in order to used the resetter:

Reset Samsung SL-M2070/2675F

http://www.youtube.com/watch?v=4vbHInXaFOI

Hello
Although the software resetter for the Canon Pixma MPC190 printers has available on the internet but before using the software you must reset the printer manually. But manual reset can not reset the counter printer permanent, to reset counter permanent require software resetter such MPTool or Serive tool software. Reset for Canon Pixma MPC190 Printers Enter the service mode SERVICE MODE - pressing buttons Menu, Copy, Scan, Copy, Copy Choose TEST MODE. Select 8 PRINTER TEST TEST MODE. Choose 3, EEPROM CLEAR Select 0, INK COUNT Press the Set button. Click Stop / Reset button (return to item 3), and again press the ON / OFF Good Luck

download free software resetter epson stylus photo 1390

Check for status monitor. Flashing alternately mean need to reset waste ink counter, using epson resetter. Just googling for resetter, or contact me for free resetter.

I think the resetter you have downloaded is for resetting waste ink counter, not for ink level. For resetting ink level counter (that reach zero) use hardware resetter or use use chip with autoreset function. Ink level reach zero is ink out, after resetting ink level reach 100% (full). But it's just program, not actually.

Hi there
You can try this it some times works.

Super Canon User's method of resetting IP1600
1.Press Resume button hold for 1 - 2 minutes (count to 1 to 15-16)
2.Open the cover right away
3.Release Both cartridges out and then put cartridges them back again
4.Close The Cover
5.Turn Off Then Turn On again.

You can download the Resetter tools program from my website.

Click Link = http://www.4all2sell.com/reset-tools/ip1600st-RESETTER-TOOLS.zip
1. Download software for Canon iP1200, iP1600, 2200 Printers.
2. Unzip downloaded file by etc
3. Run GeneralTool.exe
4. Select the connected USB port number from USB PORT
5. Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
6. In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.
If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.
Free WinZip http://www.winzip.com/downwz.htm
Please call back to vote
All the best: Pineworks

first go to this website download their software http://www.ssclg.com/epsone.shtml. after that install.

second go to counter reset improvements reset counter or go to protection counter to reset counter.try this but i no sure which oen please try this two method to see can or no