Firmware update it http://www.rekam.ru/drivers/dcj01x.bin
copy the bin to a freshly formated by the camera SD card... turn off the camera... Press and hold the up arrow keep it pressed for all 3 100%'s turn the camera on it will take about 2 min i think..
Your camera is NEW again with like 10 fixes by the old firmware.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Black smoke is indicative of carbon or incomplete combustion caused by either poor ignition (weak spark) or too much fuel (choke setting). Check out these areas.
Your power setting are set to turn off the screen after a set time to change this.
Click on the start menu, Control Panel From the control panel select power options. Select Change advanced power settings Find Display - Turn Off Display After Adjust the time from the current time to a more suitable time.
Red to red, then black to black. Negative is always off first and on last! If it doesnt turn over even by jumping, the clicking is your starter solenoid = starter motor possibly defective. One way of trying to start it, is to tap the starter motor while trying to turn the engine on. Not 100% garanteed but 7/10 times worked for me rescuing people!
turn tv on picture comes up 2to3 seconds later tv blacks out then stand by red light flashes 4 times in a row repeatedly..can not turn on or off when stand by light starts flashing but before tv blacks out you can turn tv on and off repeatedly and picture and sound work.You have to unplug power cord for 30 seconds after stand by light comes on to get tv to turn on.
that's because you need to focus the cam. start turning the black dial clockwise until you can see the image in focus. it will take quite a few turns to see a difference. if you turn it like 10-15 times and there still isn't a difference, try turning it the other way about 25 times. hope this helps!!!!
Some 235s had a problem with the contrast setting. When the contrast is set to full the screen turns black.
When you turn on the GPS and the screen goes black, try tapping the left arrow on the track pad a few times. You should see the screen start to lighten. If that doesn't work, tap the power key and try tapping the left arrow a few times.
×