Pride Mobility/Travel Pro/schematics

Question edited for clarity.
Question moved from Cars and Trucks category.

Pride Go-Go are a range of scooters in 3 and 4 wheel. With a multimeter, test continuity from pin to pin across the connector. The best idea is to take it to a local dealer as they have access to factory data. The controller wiring is complicated and models of controllers has changed over the years. There is some help in the link but not a lot.

https://www.google.com/search?q=pride+go+go+ultra+scooter+wiring+diagram

I always check scooter reviews on this site: https://mobilityseeker.com/. They have the top 10 best electric scooter reviews and kicking manual scooter reviews for both adults and kids. Good luck with your research!

Basic Troubleshooting Instructions - Pride Mobility Products

www.pridemobility.com > Resource Center

Pride MobilityINFINFB2468 Jazzy 614/Jazzy 614HD with Dynamic Controller Troubleshooting ... LiftChairs. INFINFB2061 Basic Troubleshooting Instructions: Lift Chairs ...

Pride Mobility Products Corp. - Product Owners Manuals ...

www.pridemobility.com > Resource Center

Pride MobilityHelp Me Choose · Where to Buy · Request to Be Contacted · View all Models. Pride Mobility Scooters ... Power Chair Consumer Safety Guide .... Version / Date. Flash. C 01/04. Pride LX Series. C 05/08. Z-11. B 07/04. Manual Wheelchair ... Travel Scooter Throttle Control Lever Operation Product Insert ... Victory 9/Victory 10 ...

Troubleshooting / Repairs Mobility Scooter, Power ...

Is the brake lever in the correct position and not in freewheel mode !

I can't get the wiring schematic for my Pride scooter either.
For some reason these seem to be proprietary and only available
to their dealers. Try monsterscooterparts.com to see if they
can help you.

lift dust boot on the bottom section of the yoke below the fiberglas covers and the yoke tilt adjustment, the adjustments are located at this nifty hiding place

hi, Five times is related to a brake issue in relation to the free-wheel lever.. look at the micro switch that moves in relation to the freewheel lever, it has a button type that presses in , that can stick and not release fully ...

Regards
Rob

www.gewizrepairs.co.uk

hi, what's the problem ?

Regards

try mobility centre penge
0208 676 0944

I sounds like the switch is not making contact relieably. Make sure your key is clean and if that does not work, than the switch inside the console will need to be replaced. Contact Pride Mobility for a technician local to you.