It will not cool below 72. 73 and when energy saver is on, it is always running

Hi Paul,

• Energy Saver Mode most likely shutdown the compressor and Fan Only will be running to recirculate Ambient air into the room.

• Make sure there is no Port or Vent that is open on your unit and would let hot air from outside be mixed in with the ambient air especially if it is hot outside.

• Also refer to the troubleshooting section of your owner's manual.

Good Luck,
JP

Check that the contacts powering the compressor is free, and not welded shut due to arcing.

i bought the air conditionor new and it will not cool what can i do

Hi,
It is up to you if you want to replace just because the energy saver feature is not working... if it is still cooling then I would probably keep it...but that is your call...


heatman101

Hi,

Here is a tip about troubleshooting your air conditioner...
There are many things that can cause your air conditioner not to cool...

AirConditioner Trouble - Review the Possibilities

heatman101

The Energy Saver mode is activated by using the hand held remote control, that comes with the unit. Pressing the Energy Saver button activates it. Once activated the fan will shut OFF when the the compressor does. After which, about every 3 minutes the fan will turn ON to check the room air to determine if cooling is needed.

It sounds like, you're missing the hand held remote control?

have you tried turning off and on power from the plug ?

The energy saver setting will turn the blower fan off when the thermostat reaches the desired room temperature (with the compressor). Other non energy savers only cycle the compressor to regulate the room temp. so their fans will operate continusously using more electricity.

test123

Call 1-877-337-3639 or haier units, then the next page haier unit and model #'s.