Question about Emerson EWD2203 DVD Player/VCR
I have an Emerson TV,DVD,VCR combo and I can't find a code to use with my RCA Navilight6/RCR660.
I have an Emerson EWD2203 VCR/DVD combo with no user manual. I have looked up Emerson VCR/DVD combo, the model number, etc. on Google and other search sites, but cannot locate the correct codes. I tried the DVD code alone (which is the main component I need the remote for so I can move from one episode to another) and am having no luck. Need DVD/VCR combo remote code not TV remote code
Posted on May 28, 2009
I have an Emerson TV-VCR combo and I can't find a code to use with my Phillips Universal remote.
I have an Emerson EWD2203 VCR/DVD combo with no user manual. I have looked up Emerson, the model number, etc. on Google and other search sites, but cannot locate the correct codes.
Posted on Jun 16, 2009
Tips for a great answer:
0154, 0236, 0463, 0180, 0178,
The One For All 4 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, a Motorola cable
box, and an RCA VCR.To control devices other than the default brands,perform
the following steps; otherwise skip this section:
 Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
 On the remote control,press a device key once (i.e., VCR/PVR,
DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press VCR/PVR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once.After programming
a DVD Combo device, you will be able to control channel selection,
volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
 Press and hold SET until the LED (red light) blinks twice,
then release SET.
 Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
 Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next
NOTE: If the device does not have a POWER key, press PLAY
Usually answered in minutes!