Question about Integra Audio Players & Recorders

No sound on my integra receiver - Integra Audio Players & Recorders

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

My integra av receiver model no DTR-70.1 amplifier displays but no sound what could be the problem?

http://www.integrahometheater.com/faqs.php Check the connections and try a master reset?
Perform a master reset. To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode.

Jul 03, 2018 | Integra Audio Players & Recorders

1 Answer

I have a Integra 7.8 it powers up. The problem the sounds cuts out now after 30 seconds or so. Then start making a popping sound in speakers after that. system has been installed for 6 yrs

if there is smoking near it then it needs to be professionally cleaned

Jul 06, 2015 | Integra Dtr-7.8 Receiver

1 Answer

Integra 7.1 goes into protect mode when turned on aprox. 10 seconds.Any help would be great in getting to work.

You will have defective output transistors

Sep 29, 2014 | Integra Dtr-7.1 Av Receiver Surround Sound...

2 Answers

How to fix Integra 7.8 display is dead

They will be value of 10 ohms or less in the secondary power supply attached to the front assembly

Jul 20, 2014 | Integra Dtr-7.8 Receiver

1 Answer

Integra dtr 20.3 receiver. no sound from any comp onents

You have a defective processor pcb assembly and it must be changed.

Jan 17, 2014 | Integra Audio Players & Recorders

1 Answer

Integra DTR-5.6, no sound for am/fm tuner

reset receiver if that does not work You will have a defective processor pcb

Aug 24, 2013 | Integra DTR 5.6 Multi Media Amp

1 Answer

I have a Integra receiver model number DTR 66 and I have no sound. it appears to have everything connected and should be working. I would like to know how to reset the receiver or what steps do I need to...

NO sound at all? That would be odd as its internal FM receiver is independent of any user connections. I'd work on getting FM to work first, then move on to more complex issues.

The manual is here:

http://www.retrevo.com/support/Integra-DTR-6.6-Receivers-manual/id/550ag000/t/2/

To reset the AV receiver to its factory defaults, turn it on and, while holding down the [Video 1] button, press the [Standby/On] button. "Clear" will appear on the display and the AV receiver will enter Standby mode.

Dec 26, 2010 | Audio Players & Recorders

1 Answer

My left rear speaker has no sound. All others work. I have tested the speaker on a different reciever and it works fine. My reciever is a integra DTR 5.5

Swap your left and right rear speaker over. If you still get no sound from the right speaker connected to the left speaker connection on the receiver, then you have a fault on the receiver output. Check your manual first to see if any setting switch off the rear speaker before taking the unit for repair or replace

Nov 26, 2009 | Integra Audio Players & Recorders

1 Answer

Low to no volume output from Integra DTR-5.2 receiver

most higher end integra's have a input level adjusment or input selection for each and every input. Perhaps you are not on the correct input, go to onscreen programming and check out the input level and input select - also try the tape in another input like tape 2 or cd. It will not hurt the receiver for a test. Also, if you are using the cheap cables from the manufacturer - try a pair of cables that you know work or go by some. BTW, you don't need to spend $40 for cables order them online through amazon or other store. Gold / sliver plated oxygen free are best.

Jun 30, 2009 | Integra DTR-5.2 Receiver

1 Answer

No sound from speakers from components with Integra 6.9 receiver

Turns out it had to do with one of the settings for the new Blu-Ray player.
Thanks anyway.

Jan 17, 2009 | Integra DTR-9.1 7.1 Channels Receiver

Not finding what you are looking for?

View Most Popular

Audio Players & Recorders

My integra av receiver model no DTR-70.1 amplifier displays but no sound what could be the problem?

Integra Audio Players & Recorders

Open Questions:

0 Answers

I have a integra DTR-4.6 receiver. I can only get 1 speaker in each of my zone 2 areas (4 locations) to come on. This is probably something simple. Any ideas where I can look next?

Oct 05, 2017 | Integra Audio Players & Recorders

Ask a Question

Usually answered in minutes!

Latest Celebrity Headphones Report

View all Fixya Reports

Are you an Integra Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual

DTR-7.8_En_A.pdf. user-manual-Dtr-7.8...

Integra Dtr-7.8...

Have a manual for Integra Audio Players & Recorders? Or just drag it here!

No sound on my integra receiver - Integra Audio Players & Recorders

Add Your Answer

Attachments: Added items

Related Questions:

My integra av receiver model no DTR-70.1 amplifier displays but no sound what could be the problem?

I have a Integra 7.8 it powers up. The problem the sounds cuts out now after 30 seconds or so. Then start making a popping sound in speakers after that. system has been installed for 6 yrs