No rining heard on headset.

Strat with headset 'OFF' then hold power button until light flashes blue and red or solid blue, then search for headset on phone, pass key should be 0000, 1111, 1234.

You can get the manual by searching for the FCCID, which should be in the headset https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm

I just uploaded the manual in PDF on FixYa...

you haveto have the bluetooth connectivity serch for th device. one the device is found then your phone can be linked to that bluetooth adapter.

It sounds as if the device is not paired with your Chocolate. Press and hold the button on the face of the HBM-710 headset for approximately five seconds, or until the light comes on and stays on steadily, then discover the device with your handset's Bluetooth screen. Once it shows up in the list of devices, select in and pair it with your phone.

It is a function within your phone. You need to look for a setting on you phone with something about auto answer with headset or something like that and disable it.

First, open the phone's Bluetooth screen. On the HBM-710, press and hold the button on the face for about five seconds, or until the light comes on and STAYS on. Now find the headset with your phone and pair it.

Hope this helps!

Just came across your question while searching for the same answer - Here's what I found out:

When it's off, press and hold the on button for 5 seconds - it'll turn on, but keep holding until you hear the short beep - the light's on and you're where you want to be. Here's the full text that I found from the manual:


-With the HBM-710 off, press and hold the PWR/END button for 5 seconds
(You will hear a short beep and the LED indicator will stay red, when the device enters pairing mode)
-Using your handset, find the "Bluetooth menu" and "search for" or "add" new devices
- Select "LG HBM-710" from the list of devices and pair it with your headset
- When asked for the Pass/PIN code during the pairing procedure, please enter "0000" (4 zeros)
- Once pairing has been completed successfully, you will hear a beep
- After pairing successfully, be sure to "connect" to the LF HBM-710
- If you want to pair with other devices in the future, the headset must be in "Pairing mode"
- If it will be not connected the "Pairing" for three minutes, it will be turned off.

Sounds like someone "hacked" your headset and changed the code and display name. if you don't know the new code then my only suggestion would be head to your local distributor (probably a Verizon store) and ask them to reset your headset for you.

Actually it's a Treo 680. Finally took the battery out of the phone. That seemed to clear everything so that I pair the bluetooth with no problem.

maybe its already connected to another device, try disconnecting from the other device, then connect it to the one you want to