Tumble dryer not working

Condenser dryers are simple in operation. They use a heater element to force hot air to heat the clothes and turn the water to steam. That steam is turned back into water by drawing cold air into the machine and over the heat exchanger unit and into the drum. The problems with them is that they are slow to dry.

Your best bet is to call for service, and the problem is likely the sensor probe or one of the thermal cut out.

https://www.4candy.co.uk/tumble-dryer/ro-h10a2tce-80-31101805/catalogue.pl?path=111515,111515&model_ref=14378839&page=2

..

Control board fault. See... https://www.espares.co.uk/advice/careandmaintenance/how-to-fix-an-e15-error-on-a-hoover-washing-machine

My tumble dryer is not heating up! - 24'7 Home Rescue

https://www.247homerescue.co.uk/my-tumble-dryer-is-not-heating-up-2/

My dishwasher won't fill with water! ... My TV will not turn on! ... If your tumble dryerdrum is not heating up, but the drum is spinning normally, then you might be ...

Tumble dryer not heating - White Goods Help

http://www.which.co.uk/news/2012/11/safety-alert-beko-tumble-dryers-at-risk-of-fire-303974/

Heating elements can fail. These are relatively easy and economical to replace. The heating element is not necessarily the culprit if your tumble dryer does not get hot, however. There are thermal overload cutouts fitted to many machines. If they fail, the current will not be passed to the heating element. Replacement is again, fairly straightforward.
Tumble dryers will often have thermostats fitted. A heater control one, and an exhaust thermostat. The first keeps the temperature correct. The second, as its name suggests, monitors the temperature of the exhaust (in case the airflow in the machine is impeded) Once again, replacement is not too much of a problem.
http://www.repairclinic.com/Dryer-Troubleshooting
Please look, at the link above, it will show you how to perform troubleshooting. procedures and repair.
If you feel you don't want to do it yourself, please call a Hoover Tech, and get it looked at. Ask for a "Quote" for the repair, so you get an idea of whats what.

This sounds like the thermostats or heater

ForAll Your Appliance Video Help Visit Apart4u video tutorials
see other tumbledryervideos here


Common faults -
1 The heating elements can fail(meaning open circuit)
2 There are cut-outs (T.O.C's) thatmight need resetting
3 The thermostats (stats) can tripout or burn out (meaning opencircuit)
4 Moderntumble dryers also have sensors and pcb's (Printed circuitboards) thesehaveprograms that can fail and circuitry although most should produce an errorcodeshowing you were the fault is.
5 Faultyconnections and burned wires may also bethe fault.


You-Tube video "sfGInKA3yp8" placeholder (do not delete)

Washin machines "do not" have heating devices, make sure to check your water heater and turn it back on to get your water heated.
That will get you back in hot water business.
GOOD LUCK.

Hi,
You may need to replace the thermostat or the heating element.

there will be a red overheat switch on the rear on most models, simply pull the machine out and press reset, the most cpmmon cause is running when empty or a build up of lint. if the doesnt work then it will be an open circuit element.

I fixed it, allright, by returning the washing machine back to the store. Thanks anyway.