Need new door - Helman Group Kitchen Appliances - Others

If the toner door on your MP C307 printer is broken and causing the cyan and yellow toner cartridges to malfunction, you will need to replace the door to fix the problem. Here are a few steps you can follow:

1. Order a new toner door: Contact the manufacturer or an authorized dealer to order a new toner door for your printer. Be sure to have the model and serial number of your printer on hand, as you will need to provide this information when ordering the replacement door.
2. Install the new toner door: Follow the manufacturer's instructions for installing the new toner door. This will typically involve removing the old door and securing the new one in its place.
3. Test the printer: Once the new toner door has been installed, test the printer to ensure that it is functioning properly. If the cyan and yellow toner cartridges are still not working correctly, it is possible that there is another issue with the printer that will need to be addressed.

I hope this information is helpful. If you have any further questions or need additional assistance, please don't hesitate to ask.

The main control board thinks the door switch circuit is "open" - you would need a professional to . Is the loading door closed? No, close the door. Yes, go to step (2). 2. Disconnect the plug from J2 on the Main Control Board and check for continuity between the pins in the plug. Open, check the door strike. If good, replace the door switch assembly. Closed, replace the Main Control Board.

i have not replaced the battery door but have disassembled an S5000 following the service manual

it looks like once you complete the first step 'Removing the R CABINET ASSY' you can withdraw the hinge pin and replace the battery cover without any more disassembly [see attached image]

The old door had a hidden trigger that signaled when the door was closed.
You need to retrieve the trigger from the old door and fit to the new door.

Hi,
Since you have not mentioned the model i can give for top loading first you can easily replace the door by removing the screws first four screws will be present first remove that then lift the door with help of screw driver lock will be released then you can remove the old door
Second model if it front loading means it is simple only two screws has to be removed you just lift the door sitting of the door will be displaced you can easily remove the door in reverse you can fix the new door

best bet call your local wrecking/recycling/junk yard and ask them. if they don't have one they should be able to find you one

Do you have the new handle already? I need a whole new door due to a scratch and will have a new handle from the scratched door that I wont need........

No need to get new door if it's only the handles that broke off, unless they fell through the rust or something. Buy a new set of handles from dealer or parts place, or even autorecycler (wrecking yard) and change them.

Hey I need a new door for driver's seat so if you selling new door or if you have new door please contact me at 202-294-6695. Thank you.

MoGi

my door indicator light wont stop flashing the door is locked