I need to know how to use them too
SOURCE: Newcon Optik Night Vision Binoculars BN5
The lenses screw out, the electronics are in the body and this involves removing all the screws, including the ones behing the rubber casing. Why do you wish to strip them out?
SOURCE: tasco nv 356 night binoculars
Check the HV to the tube and see if you can see any discolouration or spots on the tube - they often indicate tube failure. Many binoculars use the one power supply for both tubes as the current demand is very low. Often, one tube operation indicates tube failure, but a wire or connection could be at fault.
SOURCE: Was wondering if there was
Yes, First, when you take the lens off you binocular make sure you are in a very clean room.
All you have to do is unscrew them. Use a good lens clean that is anti-static. If you don't every piece of lent, dusty bugs, flaky shin, etc. will be attached to those lens. stewbison
282 views
Usually answered in minutes!
×