No printing Hi I cannot print any page from my canon IP1800 since I installed windows vista. looking at the Control Panel everyting seems OK: the printer canon ip1800 is on and checked... HELP!

Sounds like a print driver issue, try uninstalling the print driver and installing the UFRII driver.

Suggest you download the On-Screen Manual and refer to the Troubleshooting Section:

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1800#BrochuresAndManuals

Sounds like you have anumbe rof problems; I would suggest you check to make all parts are properly installed and you perform a cleaning.

Trust this is helpful.

Hi!

Kindly follow these steps:
1.

• On Windows XP or earlier: Go to Control Panel -> Printers and Faxes

• On Windows Vista/7: Go to Control Panel -> Hardware and Sounds -> Printers (or Control Panel -> Printers - if on classic view)

2. Right click your Pixma printer icon and choose Printing Preferences.
3. In the dialogue box, tick the Grayscale Printing option.
4. Click OK to save and close.

Print a test page to see if you succeed...
Repeat and un-tick that option if you ever want to revert to color printing again.

Hope I helped,
Pelu.

Look around thoroughly in the Printers > Properties tabs. While in the shop, they have no doubt tested your computer (without your printer hooked up). Try letting your computer boot up without the printer, then with printer power on, plug in the USB cable.

Perhaps your printer is "offline." If so, right click on your printer's name in control panel. Choose "Use printer online".

Hi, Please find the work around steps to resolve duplex printing issue in Windows Vista. Please the send the *.gpd files to the cu via mail before doing the steps. Duplexer Printing for Windows Vista Troubleshooting steps 1.start-all programs- accessories ? cmd -right click-run as administrator 2.Stop the Spooler service - Type net stop spooler 3.Change current directory Type cd windows\system32\spool\drivers\w32x86\3 4.Backup the old gpd files - Type copy hp*.gpd *.bak 5.sent the zipped file to customers email address through astro and then download the file to customers desktop 6.extracted the files from the zipped folder and then pasted those files to windows\system32\spool\drivers\w32x86\3 7.Remove old BUD file Type - del HP*.bud file 8.Restart to spooler service - Type net start spooler 9.checked under printing preferences if the both sided printing is selected as automatic and then tried printing a two page document 10.checked whether its printing or not. 11.) Start-Control Panel- Printer & Faxes- Right Click On the printer -Properties-Device settings-Disable the manual Duplex printing-Click on Installed Two sided printing-click on apply & ok. 12) Then Go to Right Click on the Printer-Printing preferences-Paper quality-Select Two Sided Printing from the top drop down list where its showing What do you want to do? 13) From Print on both sides-Select Automatically from the drop down list. 14) Try to print on both side check whether its working or not.

1. For Windows XP, select the Start menu -> Control Panel -> Printers and Other Hardware -> Printers and Faxes
2. Select your printer model name icon.
ters and Other Hardware -> Printers and Faxes.
3.Open the File menu and select Printing Preferences.
The printer driver setup window appears.
4.Click Print Head Alignment on the Maintenance tab.
A message appears.
5.Set the paper thickness lever to the left, and load a sheet of A4 or Letter size plain paper into the auto sheet feeder.
6.Follow the instruction in the message.
7.The Print Head Alignment dialog box opens.
Select the numbers of the patterns with the least amount of streaking in the associated boxes.
Clicking the patterns with the least amount of streaking in the preview window, will automatically set their numbers in the associated boxes.
8.When you have entered all the necessary values, click OK

And that should do the trick for you.

Sean

1. Access the printing preferences by opening the printer Properties / Preferences:
   
   For Windows Vista
   • Click / Select 'Start' from the bottom left of the Windows screen, 'Control Panel', 'Hardware and Sound', and then click on 'Printers'. Note: If you are in 'Classic' view, Click 'Printers' directly from the 'Control Panel'.
   • Click your right mouse button on the listing for your printer, and then select 'Preferences' from the menu that appears.
     
   For Windows XP Home Edition
   
   • Click / Select 'Start' from the bottom left of the Windows screen, 'Control Panel,' 'Printers and Other Hardware,' and 'Printers and Faxes.'
   • Click your right mouse button on the listing for your printer, and then select 'Preferences' from the menu that appears.
   
   For Windows XP Professional Edition
   
   • Click 'Start' from the bottom left of the Windows screen, and 'Printers and Faxes.'
   • Click your right mouse button on the listing for your printer, and then select 'Preferences' from the menu that appears.
   
   For Windows 2000/Me/98
   
   • Click / Select 'Start' from the bottom left of the Windows screen, and 'Settings,' then 'Printers.'
   • Click your right mouse button on the listing for your printer, and then select 'Properties' from the menu that appears.
     
     
2. Click the Page Setup tab.

and select printing banner and then apply ok then start printing

Here is the full-write up on the HP PSC1210. Read through this thoroughly to ensure that you follow all the steps to make it work in Vista, since there is no Vista native driver.

Hope this helps - remember to rate :)

plz try by reinstalling your printer drivers and resit your cartridge

?? Not sure whether you are trying to make copies of something placed on the scanner bed, or print multiple pages from a computer, but both can be done.
If scanning to a copy, use the controls on the panel to set the number of copies to whatever you need.
If you are printing, use your software/print settings to set the print quantity.