URC-4021B00 codes I need one4all URC-4021B00 codes for an insignia dvd/vcr player. ASAP please cuz this "universal remote" provided codes for my sylvania tv...but not my dvd/vcr :( therefore leaving my lazy azz to get up and still control the dvd/vcr player manually! please help thanks!

urc-4021B00 codes for a sony dvd player http://www.rockabilly.net/files/manuals/URC-4021.pdf One for All URC 4021 Manuals Support and Troubleshooting Universal Remotes Welcome to Remote Central Universal Remote Control Reviews More

Hello
Universal remote codes for Sylvania TV with One for all URC - 3300 remote control are:
0054, 0030, 0171

Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding.

Highlight or write down the codes and device you wish to program
before starting step 2.

On the remote control,press a device key once (i.e., DVD/VCR,
CBL/SAT,or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,

or TV/VCR/DVD Player Combo press DVD/VCR once.After programming

a VCR Combo device, you will be able to control channel selection,

volume, and VCR functions.

NOTE: To program control of a DVD Player,DVD Player/VCR

Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming

a DVD Combo device, you will be able to control channel

selection, volume, and DVD functions.

NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)

Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

Press and hold SET until the LED (red light) blinks twice,

then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to

locate the type of device and brand name and then enter

the first four-digit code for your device. If performed correctly,

the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

Aim the remote control at the device and press POWER

once.The device should turn off. If it does not, repeat

steps 2 through 5, trying each code for your brand until

you find one that works. If it still doesn't work, try

Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY

Repeat steps 1 through 5 for each device you want to control.

For future reference,write down each working device
code in the following boxes
OK.

The codes to try for Sylvania TVs are 0054 0030 0171.

The manual and codes are available from the One For All support site: http://www.oneforall-na.com/remote.php?type=URC%203021 . The link for codes is at the bottom right of the page.

However, most remotes are limited to codes for devices released 6 months or more before the remote was programmed. If your TV is newer than your remote, then you may need to get a newer remote.

I hope this helps.

Cindy Wells

I can help you reprogram your URC-3220 Universal Remote for your Toshiba TV/VCR Combo.

The Toshiba TV/VCR Combo codes are 1145 & 0845.

Please review my Fixya Tip posts for:

TV/VCR/DVD Combo Codes
Searching for the proper codes, or
Downloading the URC-3220 users manual / owners guide.

I hope that helps.

Try holding down the tv power button and keep holding it while you press the channel button until your tv comes in.. It takes a few pushes. Make sure your tv is off first though.

I need codes for Magnavox TV Model RR2540

none of the published codes for one4all work for a mintek tv&dvd/video/player let me know plss at [email protected]

I NEED CODE FOR PHILIPS DVD PLAYER

have the same problem. I have Chunghop Universal remote RM88E but unable to find code for ORBIT DVD player

Do you happen to know the model# of your Sylvania DVD/VCR player? That will help me access the correct codes for your set. Let me know, thanks!