Want to know what tv is worth manjufactured in 2001

here is a tutorial I made:
http://www.fixya.com/support/r5001731-convergence_diagnosing_convergence
Let me know if I can be of further assistance.

Sounds like your TV needs new convergence chips.

Go to this web site.

http://www.tvrepairkits.com/xcart/home.php?cat=2653

If you can handle a soldering iron and solder fairly well, then you can do the repair.

Hope this helps.

Ur convergence it dead.U know how to solders?Buy a convergence kit.These websites have the kit.Tv repair World.com,Tv repair kits.

There should be a diagram somewehre in the tv set itself. If not, do a diagram search on your model number on your television, and it should show where those chips are.

Have to call DTV and find out if it is worth it. My rear projection TV was built in August 2002. It works very well and with the "digital" image that comes with the provider reception is very good.

Not worth to fix.Either power supply,sensor or convertion board are too costly for the part.Buy a new TV.
solutiondoct

Mitsubishi - WS-55809, WS-55819, WT-46809, WS-65809, WS-65819 PCB ... try this

that happened to me and i just gently hit it on the top and it fixed itself

you can get a red mitsubishi tube at the following link and it comes with free shipping. If youre not sure which one to order, leave them a email and they will respond quickly, just let them know your model number and what youre needing. they are listed under the projection CRT catagory on the left side of their page. Here's the link.
http://servicemanuals.vstore.ca/

If you know how to solider you can fix this yourself with no new parts.

The convergence chip is becoming desoldered from the board. If you check hometheaterspot.com's Mits forum they have very detailed info on how to fix this.