Thik paper thick paper is alway jam on all settings

There are several ways to adjust your printer for thicker photo paper:

1. Check the paper tray: Make sure that the paper tray is adjusted for the thickness of the photo paper. Some printers have adjustable paper trays that can accommodate different paper thicknesses.
2. Use the manual feed: If your printer has a manual feed option, try using it to feed the thicker photo paper through the printer. This can help prevent jamming.
3. Adjust the printer settings: Check the printer settings to see if there are any options for adjusting the paper thickness. Some printers allow you to adjust the paper thickness in the driver settings.
4. Check for software updates: Make sure you have the latest software updates for your printer. Sometimes, software updates can include new settings or features that can improve the printer's ability to handle thicker paper.
5. Check your printer manual: consult your printer's manual for any specific instructions on printing on thicker papers.

It's also worth noting that not all printers are capable of handling thick papers, so it may be necessary to use a different printer or have it professionally printed if none of the above steps work.

check and adjust the paper thickness setting for the paper in use
there are at least 4 settings for paper on the market and from your description , the paper is too thick for the setting

Every time there is paper jam, the printer knows the job is not completed and hence tries to re-print after the paper is removed and cover is shut.

Clear the print job from computer.
Power off the printer and Clear the paper jam (if any)
I would try to use different tray. The paper pickup roller in one path may be worn out.
eg Sheet feeder or multipurpose tray.
Load paper in new tray
Set the application to use new tray

Ensure you sue the right thickness (gsm) of the paper. Quality of paper is crucial. Too thin; too thick can affect functioning.

Sometimes a very small piece of paper can still be in the printer paper path after clearing a jam especially if the paper tears while removing the jam. The piece of paper may be too small to notice. Try blowing out the paper area with compressed air. Other causes could be the thickness of paper you are trying to print on, ie photo paper, thicker bond paper. Make sure the print settings match the paper thickness. I have a Lexmark laser printer, and I will get feed problems if the settings are not set for the correct paper type.

I hope this helps.

Alex

Have you set the tray to thick cardstock in the printer?
If not try that. This will let thicker paper go through more easily.
Make sure you bot have the tray as the printjob set up as the same type of paper.
How much does the paper weigh?
Also try printing from the manual feed. You're paper path is shorter that way and easier for the printer to handle.
Does it only jam on this type of paper?
Might be a fuser easy but don't think that's the case with this one.

Epson XP600 Paper jam

Is the thick 4 11 x 81/2? take the paper off the bypass tray, first send the job to the copier selecting the bypass tray the copier is going to beep telling you replenish paper in the bypass when you place the paper in the bypass make you follow the orientation of the paper on the copier screen.Might also want o replace the bypass tray roller set. If the Plain paper through Thick 3 work then you did not need to replace the main board. Are trying to duplex the paper????? When it jams where does the paper stop??

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

MAKE SURE THAT THE PAPER SIZE IS SET TO THE CORRECT POSISTION AND MAKE SURE THE PAPER IS COMPATIBLE NOT TOO THICK OR WIDE

try middle thick setting

u need to bye photo paper from the hp store the other paper come thik that y there the jamed so u need to go hp store to bue photo paper for hp u use other paper the your printer has been damged