Blurry slow picture - Sony KDL-52W5100 TV

Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/

What mode are you shooting in? It seems you may either have your shutter speed set manually to a slow speed or, alternatively you have set your apperture set to a high number e.g f/20 or there abouts. Because this is a very narrow apperture the camera will compensate by using a slow shutter speed.
Try some shots in fully automatic mode and see what happens. With a slow shutter speed you can expect any movement to produce blurred images.

The pictures are blurry due to camera shake, which in itself is caused by the slow shutter speed. Try using shake reduction setting. To increase the shutter speed, raise the ISO rating.

If your pictures are blurry, you have a shutter speed that is too slow. If they are yellow, your white balance isn't set to auto. Try using the camera in more light or setting it to full auto. There is most likely nothing wrong with your camera.

there are many reasons for blurry pictures: unsteady hand, you have selected to slow a picture speed, there is not enough light in the room. make sure the camera is on auto and there is sufficient light. try taking your photos outside during the day to test the camera.

yeah you changed the quality of the picture with the speed choice, you can attempt to fix it using an image editing program. If you downloaded this picture as it sounds then you can just download it again, and choose the slow option, but if it doesn't give you the choice it will be in the preferences or tools menu in your browser

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

When you look at the info for each blurry picture, what shutter speeds do you see?

slow the motion of taking the picture...by mashing hard the images in digital camera are always less the desirable

Maybe you have the camera set to a slow shutter speed. Try putting it on Program mode.

You're both right. The pictures are blurry because the shutter speed is too slow, but it's too slow because there isn't enough light for it to be faster. Try this: Set the ISO to 800 Set the camera at shutter priority mode, and enter 1/160 for wide angle to mid-zoom, and 1/400 for full zoom. If the pictures come out too dark ( and you're too far to use the flash ), you can always brighten them on the computer. But if they're blurry, you can't really fix that.