Hi there.
Sometimes when cameras are left for a while the lens can become stuck and you end up with an error message.
The best way to deal with it is face the camera towards the ground and tap it on the back firmly while turning it on, in most cases this method works, but in some cases a little WD-40 does the trick.
If none of this works it has to be taken to a service center for repair.
Please post back with the results and more help if needed, good luck and thanks for using FixYa!!
193 views
Usually answered in minutes!
Thank you but I think I may need to take it to get repair. It still has the error.
×