How do you unlocked LCD TV Sanyo 32K30 I have Lost the remote

To turn off your child lock on sanyo tv: 1. Press the "Menu" button from the remote 2. Then press the "CH+/-" twice 3. Press the "Enter" button to access the submenu 4. Enter the password. The default password is "1234", but if you already changed the password make sure to enter it correctly 5. Press "Enter" to switch off the child lock. Do the same if you want to switch it on.

No need to try for it, without a remote control. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://homenol.blogspot.com/
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.
If you wish to get further advice over phone; visit https://www.6ya.com/

Fault to its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Without its remote control; you can't unlock it.
If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
Gopakumar Gopalan Google

Try these codes.
0049 0097 0110 0004 0268 0012 0108 0180

Hi good day. My sanyo lcd 32K30 was locked and i dont know how to unlock it because i dont have a remote control. Would you please help me to fix it? Thanks

my sanyo lcd 32k30 have a problem when i turn on half on the screen the picture is ok and the half is black after a few seconds the picture is full what is the problem? can you help me of this trouble of my sanyo lcd 32k30 thank you

Please check the link below for tips on repairing of SMPS power supply which could have failed in your TV.

Click on :

http://www.fixya.com/support/r5826301-working_switch_mode_power_supplies

use the code 100 for sanyo tv.

You require the original factory remote to have the menus. The link below is the source of where you can order a remote.

http://us.sanyo.com/entertainment/remotes/


Jerry G.