Stove question What does F2E3 code mean?

The Error Code 'NC' is unknown Joan. Try disconnecting mains power for an hour in the hope of some type of reset to the control board.

https://www.appliancehelper.net/kenmore-appliance-error-codes/

https://www.google.com/search?q=kenwood+stove+stop+nc+error+code

..

Watch this video:

http://www.youtube.com/watch?v=W1ceH7TKkoE

Disassemble the control panel. Unplug the key panel ribbon cable from the control board and clean the edge connector. You can use a pencil eraser. Would not hurt to clean the connector on the board using an electronics contact cleaner or an isopropyl alcohol and a tooth brush. Make sure everything is dry before reconnecting.

Assemble it back and give it a try.
What is the model number?

Depending on manufacturer and model, PF can mean a number of things. On my stove, PF simply indicates "Power Fail" Yours may, too. You can clear this generally by updating the clock display. To verify that PF does indeed mean power fail for your stove, simply shut off the power for the cicuit than supplies the stove. This can be either circuit breaker or fuses. Turn the power back on after 5 or more seconds and if it displays PF again, you know it means power fail.

Otherwise, please provide the manufacturer and model of you stove for an answer.

Good luck!

It appears that this code is a code for "keypad spill" so it somehow may have gotten liquid inside the keypad. It may be as simple as removing the face panel and wiping clean the keypad and putting it together, or you may end up needing to purchase an entire keypad and installing.

F2 E3: Key held down too long or key is shorted.
Check keypad connector for firm connection. Press Cancel, if error returns after 60s replace keypad.

F7 Function key shorted Replace touch padThis is what the code means. The key could just be stuck. Try pushing it several times to see if it will unstick. before you replace the touchpad.

this sometimes works; remove power from the range unplug etc. then: get some 90% isopropyl (rubbing) alcohol from the drug store put a sprayer on the bottle and saturate all the controls and wires etc. that got wet then wait overnight or. untill all surfaces are dry and, plug in your range; your range should work again

Try shutting breaker off for 20 - 30 mins see if it resets itself, if not F7 code means possible bad EOC (clock).

Find the paper in the envelope on the back of the stove. (Behind the console.) This will tell you what those fault codes mean. Be sure to replace the paper. If it is needed again, that is where a technician will look for it.

Good luck!