Question about Poulan Genuine Weedeater Part # 36006-128

1 Answer

Weed eater GTI 17 won't run on high speed

I have a Weed Eater string trimmer that won't run at high RPM's. When the rev's begin to climb, it just cuts out and stall immediatly. It will start again on the first pull with no choke and it will idle. The second I hit the throttle it stalls. The trimmer worked fine earlier in the season( a couple of weeks ago) Any help would be appriciated.

Posted by tbarnes529 on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 41 Answers

A couple of things may work...
Make sure you have the correct Oil / Fuel mixture, if it is incorrect the motor may have problems running.
Also take off the bottom where the cord is wound up, make sure there hasn't been any grass get wound up inside it, this will cause it to stall out on high RPM.

Posted on May 19, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Husqvarna weed eater starts , but blows alot of smoke & then stalls out


Rod, Carb. may need adjusted, try loosening gas cap and start to see if cap vent plugged, there is a in tank fuel filter that you could fish out and remove to see if it is plugged. If still not running remove muffler and clean spark arrester screen, if screen plugged the trimmer will do this.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
String Trimmer Starts Then Stalls
My String Trimmer Starts But Won Stay Running
Craftsman Trimmer starts then dies
How to Clean Spark Arrestor Screen on Small 2 Cycle Engine Quick Fix
How to Clean Two Cycle Two Stroke Engine Carburetor

Sep 06, 2012 | Husqvarna 128 LD Weedeater

2 Answers

Weed eater starts but won't stay running


just bought a new Poulan 25cc 2cycle gas power weed eater . I can start it with the choke on but as soon as put on run it dies.

Jul 08, 2010 | Poulan 25cc 2-Cycle Gas Powered String...

2 Answers

I bought this poulan weed eater on 4-2-10 at walmart in westworth village . the trimmer head does ok at any spped for a 2 or 3 minutes then it just goes real slow with the speed at cutting speed . the two...


new doesnt mean free from defects sounds like the shaft is binding can be from a kink or not lubed correctly-- its new so bring back to walmart and replace or return

Apr 14, 2010 | Poulan/Weed Eater No. Te475 952711797 17"...

1 Answer

I don't know how to load line into the Troy Bilt Speedlock head


cut to pieces of string about 8 ft long. run your line through the holes on the side of the head. you will see 2 smaller holes on the inside. put the string in those 2 holes and begin turning your head to install the string.

Aug 22, 2009 | Troy Bilt Tb70ss Gas Trimmer

1 Answer

WEED EATER STRING


you have the string in backwards, or the gear is not ingauged.

Aug 13, 2009 | Poulan/Weed Eater No. Te475 952711797 17"...

2 Answers

My Troy Built weed eater wont keep string going.


troy built is pure trash ill never waste money on any of thier trash agin i have a weed eater 5 months old it wont even crank pure china trash

May 09, 2009 | Troy Bilt Tb70ss Gas Trimmer

1 Answer

Ryobi weed trimmer


I have one of this trimmers. It is simple to replace the line. 
-First line up the arrows on the bottom of the spindle. 
-Then feed the line back in one of the holes in the side of the spindle (this is the same hole that the cutting string comes out of). 
-You will see the line come out of the bottom of the spindle. 
-Take that line a place it in the hole on the bottom of the spindle. 
-Leave about 9 feet of string hanging out of the weed eater (do the same with the other side). 
-Then turn the inside wheel (I can't remember if it is clock wise or counter clock-wise but it will only turn one way) most of the string is rolled into the spindle. 
-Cut the string of about 5 inches out of the weed eater. You're ready to cut!

May 24, 2008 | Ryobi 15" Electric Factory Reconditioned...

Not finding what you are looking for?
Poulan Genuine  Weedeater Part # 36006-128 Logo

1,163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Poulan Measuring Tools & Sensors Experts

Brad Brown

Level 3 Expert

18397 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Tom Chichester

Level 3 Expert

55960 Answers

Are you a Poulan Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...