Question about Archos 2 Vision MP3 Player

Open Question

Archos Vision 18b mp3 player

The problem solver answers meant nothing to me. it won't load into my windows media player & won't sync auto or manualy

Posted by deborah remnant on

Ad

5 Related Answers

Anonymous

  • 2 Answers

SOURCE: Firmware upgrade results in arclibrary boot failure

I managed to overcome the problem by doing a factory reset. Unfortunately doing this initially created more problems in that on reboot the main screen appearance looked as it should but was almost inoperable. When the usb cable was connected to my pc the disc did appear on My Computer . The system folder was only 1MB. By good fortune I had copied and saved my Archos files before I carried out the factory reset. Copying the original system files ( about 20MB) back to my Archos returned normal behaviour. Further, two additional buttons appeared. One was a manual arclibrary update button and the other a USB setup button . I cannot get file transfer to operate under windows media player mode and Windows media player 11. No problem though. I use PC hard drive mode and carry out a manual arclibrary update. None of this was possible prior to the factory reset. I believe I would still be having serious problems had I not saved and restored my system files

Posted on Feb 11, 2008

Ad

Anonymous

  • 8 Answers

SOURCE: problems when i sync my archos with media player

Sounds familiar, I did that a few years ago, then it seemed that it formatted my whole mp3, then copied what i wanted. So if I wanted to sync 1 song, that was all on my mp3 after the sync...
That's the last time I used sync, bad memories.
I now copy manually from the PC to my Archos. Then you can control the order of the mapsand the maps you add. If you sych, WMP puts every map in the library in the Arhos music folder.
I just don't get the point of synchronising...

Posted on Nov 04, 2008

Ad

Anonymous

  • 35 Answers

SOURCE: cannot register product and it will not show player in media play

i have idea well.. i think you 'd read the use guide, where you may get your answer. hopfull you get your puzzle done .

my store

Posted on May 28, 2010

Eva Hatcher

  • 38 Answers

SOURCE: i have loaded music from windows media player to archos 15b vision and they are in the files but wont play and when you click on them they say warning no file??????

Ahh... I have that problem. The file may be zipped or unsupported. Either way, it's probably not going to work.

Posted on Jun 16, 2012

Wristaction

Wristy

  • 33 Answers

SOURCE: cant delete files or photos from mp3 player

If you have or can get a lend of another cable for it, try it incase your cable is bad.
I have went through 5 for my 604 as they just stop working out of the blue and getting a new one sorted it.

Posted on Sep 24, 2012

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lost paper work and need to down load it to my computer so i can download songs


Hi bsmit195
Downloading Music to MP3 Player

1...You must download and install Windows Media Player 11 on your computer.
NOTE...Some older MP3 players will not work with Windows Media Player 11 or Windows 7 with Windows Media Player 11.
If this happens to you, then you will have to uninstall Windows Media Player 11 and install Windows Media Player 10.
2...After you have downloaded and installed Media Player on your computer.
3...Open Media Player on your computer.
4...Install all your music into Media Player that you want to install on your MP3 player.
5...Plug in your MP3 player to the computer using your Data/Sync cord, be sure that Windows Media Player is on.
6...Media player should recognize the MP3 player and sync with it.
7...After it is sync'ed with the computer,you can add the music you have installed into Windows Media Player to your MP3 Player.
Free Answer...Please take time to rate me

Jun 18, 2011 | Philips GoGear ViBE Digital Media Player

1 Answer

I want to down load something from the inter net to my sony digital media player. how do I do that.


Hi paulasurber...

Downloading Music to MP3 Player

1...You must download and install Windows Media Player 11 on your computer.
NOTE...Some older MP3 players will not work with Windows Media Player 11 or Windows 7 with Windows Media Player 11.
If this happens to you, then you will have to uninstall Windows Media Player 11 and install Windows Media Player 10.
2...After you have downloaded and installed Media Player on your computer.
3...Open Media Player on your computer.
4...Install all your music into Media Player that you want to install on your MP3 player.
5...Plug in your MP3 player to the computer using your Data/Sync cord, be sure that Windows Media Player is on.
6...Media player should recognize the MP3 player and sync with it.
7...After it is sync'ed with the computer,you can add the music you have installed into Windows Media Player to your MP3 Player.
Free Answer...Please take time to rate me

Jun 10, 2011 | Sony NWZ-E438F Digital Media Player

1 Answer

Nx-142 my pc won't load the cd software or recognize the naxa mp3


www.mediamonkey.com
visit the above site and download/install the mediamonkey player. it will sort all your music and sync it to your player(you are given a choice of treating the player as a player or a hard disc drive) the just auto sync or manually sync......it's also an excellent alternative to windows media player.........and it's free

Feb 28, 2010 | Naxa Electronics NX142 MP3 Player

1 Answer

How do I delete pictures from my sony walkman nw z 405?


There are two sets of solutions that you may need to apply.
1) Disable Auto-Sync in Windows Media Player. This is how the songs may have been loaded in the first place. Connect your mp3 player to the computer and open Windows Media Player. Run the mouse over the "Sync" tab - a black arrow should appear - click on the arrow. Click the option that says "Set Up Sync" and uncheck the box that says "Sync Devices Automatically".
2) Delete songs using Windows Media Player. Click on the Sync tab. Find the songs that are loaded onto your mp3 player by clicking the icon that represents your mp3 player. Highlight the songs by left-clicking a song once, and press "Delete" on your computer's keyboard.

Good luck!

-Tha Mp3 Doctor

Feb 13, 2009 | Sony NWZ-S615F Walkman Video MP3 Player

1 Answer

Help!! My gogo gear keep deleteing by music oof


Disable auto-sync in Windows Media Player to solve the problem.

Disable Auto-Sync in Windows Media Player 11 – go to Microsoft's website for pictorial demonstration

Major Symptom: The Mp3 player is adding (or deleting) songs that I don’t want onto the player

Major Solution:
Open Windows Media Player WITH the mp3 player connected
Move the mouse cursor over to the Sync tab
Click on the tiny black arrow underneath the word “Sync” to bring down a drop-down menu
Select Set Up Sync (this option will not appear if your mp3 player is not connected to the computer)
Uncheck box that says "automatically sync files to device"
Click OK to finish

Voila! You are now set up for manual sync instead of auto-sync.

-Tha Mp3 Doctor

Nov 13, 2008 | Philips SA5125/37 MP3 Player

1 Answer

Sync with media player


First, get a music service other than Rhapsody.
Second, disable auto-sync in Windows Media Player - the details for doing this can be found in the FAQ section of Philips website.

-Tha Mp3 Doctor

Oct 13, 2008 | Philips GOGEAR SA6045 MP3 Player

1 Answer

Menu


These directions only apply to the Philips SA6045/37:
It's not going to be easy, because you will have to do two undesirable things: 1) Set your player up for auto-sync, which will result in the player adding unwanted media files to your player without your consent - and possibly overloading your player; and 2) You will have to roll back to Windows Media Player 10.

If you ask me, it's not worth it, but here's the procedure:
  1. Playlists can only be synchronized to your player via “auto sync”. Autosync will automatically synchronize your Windows Media Player library content and your player content each time you connect your Player to the PC. If you use the “manual” sync option the tracks in the playlist will transfer to your player but the playlist itself will not.
  2. Hook up the Player to the computer, allow a few minutes for the Windows Media player to recognize and detect the connection of the Player.
  3. Click on the Sync tab.
    070507074130_18944.gif
  4. Click on “Sync settings” or “Set up sync”
    070507074142_18945.gif
  5. In the pop-up window, select the playlists that you want to sync
  6. Click “OK”, the sync will start automatically
Note: playlists never show up in the device panel under the sync tab of Windows media Player even if they are on your device. Check on your device whether you can see the playlist.

-Tha Mp3 Doctor

Sep 12, 2008 | Philips GoGear Flash MP3 Player

1 Answer

I can't load no more than 60 songs


You have auto-sync enabled - disable it

Disable auto-sync in Windows Media Player - Microsoft's website explains it far better than I can

Open Windows Media Player WITH the mp3 player connected
Highlight Sync, click on the arrow to bring down drop-dow menu
Select Set Up Sync
Uncheck box that says "automatically sync files to device"

Jun 20, 2008 | SanDisk Sansa E280 MP3 Player

1 Answer

Auto deleting songs we wanted there argghhhhh!


If you are using Windows Media Player to synchronise the MP3 player, you need to change the Sync settings, from auto to manual.

If the Sync option is set to Automatic, then Windows Media Player will synchronise your PC and your player, so they have the same tracks. Unfortunately, if a track is deleted from the PC or the MP3 player, then Media Player will delete it from the other.
However, Media Player may have only deleted the tracks from its library, and not from the PC. If you go to My Documents ----> My Music, you can see if the files are still there.

The Manual sync setting allows you to drag and drop files from the Media Player library on to your player as you wish.

Assuming you are using Media Player, connect the MP3 player to the PC.

Open Windows Media Player.

Right-click the Sync tab and select Tools -----> Options.

Click on the Devices tab and select your player from the list then click properties.

In the window that pops up, click on settings, then click the button next to manual to change from auto.

Click on Finish, then close the other windows by clicking on Apply or Ok, until you are back to the main Media Player screen.

You should now be able to transfer your tracks manually.

If this doesn't work, give more details, including make and model of player, and the software you are using for transfer, and I'll try to help further.

May 14, 2008 | Audio Players & Recorders

1 Answer

Loading playlist


The XP Drive letter assignment has nothing to do with Playlists. You need to set the device mode to MSC. Settings>Mode or USB Mode>MSC. Then in Windows Media Player (version 10 or higher) enable auto-sync for the PLAYLISTS only, unless you want all the music force fed to your device everytime you connect. You can add to this question for additional assistance. Best of Luck.

Oct 01, 2007 | SanDisk Sansa e260 MP3 Player

Not finding what you are looking for?
Archos 2 Vision MP3 Player Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Archos Audio Players & Recorders Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

Harrie

Level 3 Expert

6740 Answers

Are you an Archos Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...