I have a brand new cookworks fruit juicer that does work when I switch it on

Well, you won't find any solutions on this web site. It is just for advertising other products so don't waste your time searching.

sorry but the model and brand name is not shown

Without a model number, it is going to be difficult to find the manual. The only way I can think to find a manual would be to find the model # by searching through pictures of similar items to find the one that is most similar to your own. You might get lucky and find the same model for sale on E-bay (or at least something similar enough that you can use the model # to order yourself a manual). Other than that, you might be able to find a serial number on the inner parts of the juicer and look that up. If you can find a serial number from a part, you can look it up and see which models that part is from. That will at least narrow the list of models you might have. If you can find 2 or 3 serial numbers from the inner workings of your juicer, then you can cross reference each against the others and come up with a very short list of options (which all may be covered in the same user's manual). Best of luck in your search!

You will need brand name and model number regardless of where you go to find one. You can try the link below:
Kitchen Manuals

By 'milton' do you mean that the mixer is of the 'Hamilton Beach' brand? If so, can you find a model number on the bottom of the product? With that, you could probably find a user manual online.

It is not possible to attach extra units that can mesh with this juicer than the reccomended attachments that is available.Contact philips appliances dealer close to you.

Hi- I have been having the exact same issue and I couldn't find a solution until, after a LOT of searching, I found this picture of the original tool that came with the juicer and is used to extract the blade. https://dl.dropboxusercontent.com/u/17811633/original-moulinex-tool.jpg
Someone had already mentioned in a different forum, putting the prong of a fork in the hole of the blade and turning, but I had thought they meant turn the fork in the hole, which had not worked, but actually they meant turn the blade. After seeing that picture I understood how it was meant to work. I used a pair of scissors, one prong in each hole, I twisted, and after initial resistance the blade came loose, and I was able to unscrew it. Seeing as 49 people have viewed this problem, I decide to post the solution here as I am obviously not the only one who has had this issue - but it's the typical thing people search for when they have the problem but no one bothers to then post the solution - so I hope this helps everyone to be able to use this fantastic old juicer!! :-)

Follow this LINK.

you can juice grapes but you will hav to put in another fruit thats hard like a carrot apple celery to push the juicer from grapes out

We have just bought the same model, I can scan the manual into a .pdf file if required.

Drop me a line at [email protected]