Trying to program a touch for incoming calls that will go through my voice mail directly

Attendant Directed Call Pickup
Description
The attendant can perform a directed call pickup from the console. This will permit calls to be retrieved before the recall timer expires or if calls have been transferred to the wrong extension.
Conditions
None.
Programming
Assign an access code to Feature 09 (Directed Call Pickup).
Enable COS Option 218 (Directed Call Pickup).
Operation
• Dial the Directed Call Pickup code.
• Dial the extension number of the ringing telephone - the call is connected.

Yes it can. Your vendor should be able to remove your mailbox and stop the call forwarding.

Mark

Your company might have a Voicemail "back door" number or an Auto Attendant number. Dial this number, press *, followed by your mailbox number and your passcode.

I have exchanged the telephone on my desk but cannot get a ring tone or flashing lights for incoming calls?

This can usually be fixed by calling the phone number that the voice mail indicator light is flashing on from a different phone number. Leave a voice mail message and then go into the voice mail and delete the message that you just left. The indicator light should then go out.

It sounds like your phone is in do-not-disturb. Press the blue key. Press the no (# key) until you see DND, then press Yes (* key). Press Turn off (0 key).

assign speed call with destination number then program that speed call access to call reroute always

You need to verify your Call rerouting, you will also need to clear any call forwarding that might be active. Its possible the system is not able to transfer a call to the forwarded location.

Need to setup call forward external on your phone. Then you can program it thru your superkey button.

try turnin ur voice mail off and discornecting it so that voice mail wont be abel 2 be acsessed