Turn on your camera, when the lense is opened, hold it till the blue screen appears, extend the lense to his maximum forcing it a little bit then when you turn off your camera, the noise won't be here. Turn on again your camera and hopes it works. I tried it on my camera, works well at the first try then again the error, i did it twice holding the lense when you turn it on, then it worked perfectly. Hope it works for you. P.S : my english isn't well but i hope it helps.
This is the exact same problem I have too. I re-charged my battery twice and it still doesn't work. I don't know whether I should spend $53 to buy a new battery? Or get a new camera, but not an Olympus.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello Sanjay -- NOT a good sign I'm afraid the 5E02 message is a PCB error.
I just checked a website for a manual with trouble shooting ideas to send you and the sites are full of 5E02 problems and the only solution appears to be - Take it back to a shop if under warrantee.
Problems were UK , USA & Australia -- (I use www.google.co.uk ) as my search engine and i typed
"olympus 5e02 error message" and it applied to non-focussing problems , no display etc
Here is one link as example -- Ray
The error message (D: 5f08 5e02) means that your lens is dying / dead. It just happened to mine (on the Mju 700, but it's the same thing) and I was told that it could be repaired, but it would cost as much as a new camera. I've only had mine 2 years and I've been really careful with it, so I'm a bit annoyed, but I have used it a lot!
this is the most common problem with the olympus cameras the lens has been knocked and by you pulling on the lens it sounds like you have done some damage to the motor that bring the lens in and out thats why its making that noise what you needed to do was move the lens either to the left or the right you will no when its fixed because the lens just pops out and the camera will be fine this works every time i just hope you havnt done to much damage alredy goodluck
the lens open halfway, the picture on the LCD is blurry and one second
after the lens close and an error appears of the screen saying "D: 5f08
5e02". what does this mean??? can you help me fixed this one??
No solution you can make-
The motor mechanism is shot
Depending on how long you have had the camera you may get it replaced or a repair price quoted.
The repair price will be horrific
buy the next camera.