Uniden BCT15X Beartracker Scanner Logo

Related Topics:

Question about Uniden BCT15X Beartracker Scanner

2 Answers

Reset or clear factory settings uniden bct15x scanner

Posted by Anonymous on

Ad

2 Answers

Wilfred guilbeault

  • Level 1:

    An expert who has achieved level 1.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 2 Answers

What is nfm

Posted on Jun 11, 2019

  • Anonymous Mar 31, 2020

    No further message

×

Ad

najib737

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Hold these 3 buttons all at once while turning the unit on (will take 2 hands)

Posted on Dec 19, 2014

  • David Kuhn
    David Kuhn Jan 03, 2015

    What 3 buttons?

  • Eric Graham Jan 06, 2017

    just found out how to reset it Resetting the Scanner (Clearing all Memories)
    To reset the scanner to factory defaults, turn off the scanner. Then, while holding down 2, 9, and HOLD, turn on the scanner. All scanner memory contents are erased.

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do you reprogram a Uniden Bearcat BC 340 CRS

Uniden BC340CRS Owner Manual

Resetting the Scanner (Clearing all Memories)
To reset the scanner to factory defaults, turn off the scanner. Then, while holding down 2, 9, and HOLD, turn on the scanner. All scanner memory contents are erased.
0helpful
1answer

Need manuel for uniden bearcat trunktracker iii police scanner

Check your scanner for a model number. I have found an online manual for the Uniden BCT15X from Uniden: http://info.uniden.com/twiki/bin/view/UnidenMan4/BCT15X . This model has the TrunkTracker III logo to the upper left of the LCD screen. The Uniden logo is to the lower left of the LCD screen. The model number is given above the upper right of the LCD screen. Then the Bearcat logo is below the right side of the LCD screen. Some other Uniden scanner manuals are available here: http://info.uniden.com/twiki/bin/view/UnidenMan4/UnidenScannersUsersGuides . Scroll down to the Individual Scanners section to find the links.

I hope these links help.

Cindy Wells
0helpful
1answer

How do I set up a uniden BCT15X

you may have to do a manual scan..or find out what frequency the different companies and police ,fire and airplanes use,,then you may need an outdoor scanner antenna,,the small antenna that comes with the scanner only picks up very strong signals,,,to program the scanner you may have to search online for programming info,,,,good luck


trevor 320
0helpful
1answer

HOW DO I GET IT TO SCAN THE FREQUENSES I ENTERED

How do we sconne frequency channel in a uniden scanner bct15
0helpful
1answer

Resetting the scanner clearing all memories

Power the scanner OFF. Press and hold the 2, 9, and HOLD keys and power the scanner ON. This procedure will clear all programmed frequencies and return the scanner to its original factory settings.

Need the manual for your scanner? You can download and print it, at no cost, here:

http://www.uniden.com/pdf/BC340CRSom.pdf

Bill B.
Listening in since the 60's
4helpful
1answer

How to clear a uniden bearcat bc760xlt

To RESET your scanner:
- Power it OFF
- Press and hold the 2, 9, and MANUAL keys and power the scanner ON

This procedure will erase all programmed frequencies and return the scanner to its original factory settings.

Bill B.
Listening in since the 60's
0helpful
1answer

How do iclear to reset

Resetting the scanner automatically clears all frequencies from memory and restores the unit to original factory settings. To RESET your scanner:
- Power the scanner OFF.
- Press and hold the 2, 9, and HOLD keys and power the scanner ON.
- The word CLEAr will appear after about 3 seconds, indicating that the scanner is ready to accept new programming.

Need the manual? You can download/print it here:

http://www.uniden.com/pdf/BC92XLTom.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Bill B
4helpful
1answer

BC92XLT

Hold in the 2, 9, and HOLD keys while turning the scanner power ON. After about 3 seconds you'll see the word CLEAR, indicating that the reset is complete.
NOTE: This procedure will clear/erase all the information that you have programmed into the scanner.

Need the manual for your scanner? You can download and print it here:

http://www.uniden.com/pdf/BC92XLTom.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Bill B



Not finding what you are looking for?

9,497 views

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts

Steve

Level 3 Expert

3290 Answers

eradiostore
eradiostore

Level 3 Expert

1667 Answers

Marvin
Marvin

Level 3 Expert

85240 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...