JBL Creature doesn't work

When the power to the system was applied to the speakers before you realized the cables were chewed, you blew some components in the power boards to the speakers. You could look to see if there are replaceable fuses. Otherwise a trip to the repair shop or new speakers.

Do you happen to have the model of the TV? My Samsung only has two digital optical outputs. If your'e plugging in JBLs, you may only have an analogue input which won't work.

You may find some on the Internet (use Google) or on EBay.

First go to this site and download and install this codec pack. Also, make sure you have your speakers set as you default sound device.

JBL Creature 2 are a computer speaker system designed and sold by JBL. The system is made up of two satellite speakers and an omni-directional subwoofer. The speaker system connects directly to a computer's available sound card output jack or a laptop's stereo output jack. Occasionally, problems can occur with the sound quality and connection with the speaker system. If there is no sound coming from the speakers, check the cable connections. Ensure the satellite speakers are firmly connected to the matching jacks on the back of the Creature's subwoofer. The connections are color coded and, in addition, each speaker connector is shaped differently to fit only into one jack. Ensure the output cable is firmly connected to the subwoofer audio in jack and the computer's audio-out jack. Ensure the power button on the back of the subwoofer is pushed inward. If everything is connected properly, the green lights on the underside of the satellite speakers will glow.If there is still no sound, tap the right-hand side audio-increase button on the right satellite speaker until sound is heard. Also ensure there is audio playing from the computer. Double check the lower right-hand side of the window's main screen and look for a speaker icon. If the icon has a red slash over it, click the icon and uncheck the "mute" option.

Hope this helps

I can't fine my power cord for my subwoofer
can i use another cord?

Check out here:http://www.fixya.com/support/t3604714-jbl_creature_speakers

make sure you plug the subwoofer into the green jack port on your pc.

Hiya

Too late to resolve the original poster's worries, I can assume, but I arrived here when searching on account of the same problem and resolved it. This is going to sound implausibly condescending, I'm afraid (and excuse th elack of technical terminology!)...

I couldn't get my left speaker to work exactly as above, but then looked carefully at the shape of the respective cables leading to the sub. You have to fit the triangle shape of the lead into the triangular shape of the hole. The speaker CAN be connected what *feels* like correctly, but is in fact connected incorrectly (ie, not all the way in).

This is more a problem with the left speaker than the right since it's a triangle and the right is a square, and can be a little fiddly.

Anyone else experiencing the same problem should probably take a quick moment just to check this isn't it! :)

just increase subwoofer level located at the front. If it doesn't work then replace your woofer if it is in warranty period because it migth be due to internal electronic components failure.

this problem is bcoz of the buttons only it require servicing see if you can show to service pesonnel he will help you out.