Disconnect all speaker connections and rca cables. Leave power, ground and remote wires intact. Try turning on again. If you still have a pprotection light your amp is faulty. Hopefully you have warranty
.A thumbs up would be greatly appreciated if this answer is helpful to you.
Disconnect all speakers (at the amp terminals) and the RCA's leaving just power, ground, and remote connected. Does it turn on now without going to protection? If so, plug in the RCA's. Still good? If so, you have a shorted wire or bad speaker. If it still stays in protection, the amp is faulty. Have it repaired or replace it.
Testimonial: "Thank you for the info. Come to find out I purchased a faulty amp. :/"
226 views
Usually answered in minutes!
×