Question about NetGear DG834G Router

1 Answer

Netgear setup trying to set up a 54mbps wireless ADSL2+ MODEM ROUTER. I have adsl modem on my pc,wanting to set up for laptop wireless through the pc.on the wireless modem it has 4 port Ethernet switch on back, but the pc doesn`t have a Ethernet to plug into.can i run it all through the adsl modem to connect, or need a different connecter, steve

Posted by boomshanka1 on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You have to connect to the router with ethernet to get onto the configuration page. what i think what you have to do is to get a lan card and install it.

Posted on Oct 18, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NEED CD INSTALLATION


You don't need an installation CD to setup the wireless but you do need the ADSL settings from your Internet provider to configure the ADSL modem.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, open the browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings. (WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access). Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security .

Jan 02, 2013 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

D-Link DSL-2750U N300 ADSL Modem Wireless Router configuration with Hathway


YES THATS TRUE. TO CONFIGURE THE ROUTER. NEED THE PPPOE USERNAME AND PASSWORD FROM THE INTERNET SERVICE PROVIDER. VPI AND VCI SETTINGS.
..THEN ACCESS THE ROUTER PAGE
..GO TO ADVANCE SETUP PAGE.
..THEN LAYER2 INTERFACE
..CLICK ADD
..CONFIGURE THE SETTINGS.
..POWER CYCLE THE NETWORK.

Nov 21, 2012 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

From where can I downlaod driver for my Digisol DG-Bg 4011N, wireless ADSL Broadband Router


already have a driver attach in modem.is no updated driver because hardware dependent. so sent service center updated your modem hardware then update driver from service center it only for u worked ( it's not joke). or" buy updated modem.

Mar 06, 2012 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

I have bought a wireless ADSL modem, Dlink DSL 2640u , How can I install and use it for another laptop? I want to use it without wire. Thanks


all wireless devices must be allowed in the router by either MAC address or by name. This is accomplished by logging into to the router and setting up the device in with the wireless setup feature in your router. The router will not allow the device to connect without permissions.

Aug 07, 2010 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

Could not make router to work, Netgear modem adding router.


i suppose you have to connect modem to router's "source" socket and modem to socket "in wall" then reset and reconfig router and you should be ok

Nov 10, 2009 | NetGear WGR614 Wireless Router

1 Answer

Router not connecting with adsl modem wirelessly


re-set it and re-configure it ur router then you get it

Mar 12, 2009 | Computers & Internet

1 Answer

Adsl led is not glowing 802C D-link


when the adsl is not blinking that means your phone line is having problem plz ask your phone line provider to check the line.

Dec 23, 2008 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

11g wireless adsl modem router tew-435brm


virgin media is dsl not adsl which is the router you had

Nov 27, 2008 | Trendware TRENDnet TEW-435BRM 802.11g...

2 Answers

About D-Link Modem


re-configure you modem and check it your ipaddress and dns value

Jun 05, 2008 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

Unable to install after 81 %


If the setup CD is unable to setup your modem/router (it is also called a "gateway") you can do the router configuration via the Web User Interface of the router. you will need ADSL settings such as:
a. Encapsulation mode. (typically PPPoA or PPPoE)
b. Multiplexing: (it can be LLC or VC)
c. Virtual Circuit Range.
d. Username & Password (ADSL UN/PW)

note: All of these ADSL settings should be provided/given to you by your ISP/ADSL provider. You can call your ISP for this settings.

just notify me if you will need further assistance doing this, but first make sure you have all the settings for ADSL.

Apr 18, 2008 | D-Link ADSL2/2+ Modem/Wireless Router...

Not finding what you are looking for?
NetGear DG834G Router Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Mike

Level 3 Expert

4369 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...