I want to use my router cwr-854 like wireless adapter and acces point help me somebody to config for using ,both .

Hello,
You can use this wireless router to connect different wireless devices together. Each device with a wireless network card (computer, phone, gaming system, printer, etc.) can connect to the router without a cable. This will form a network where information can be shared.
The main purpose people use this for is to connect their network to the internet. As long as the router is connected to your internet, every other wireless device can also connect.
Thanks,
Pat

hi

go to folowing link you will have setup manual you will ablle to have setup futures

You can't really use a router to connect to another router, you can sometimes use them as an "Extender" for range, but not as a WiFi card, they simply aren't made to operate that way.

To access Router type that --> http://192.168.1.254 into your browsers address bar, a password & logon box should appear, The USERNAME is root The PASSWORD is 1234
Now you should be able to access wizard.
Here is a better manual.http://www.cnetusa.com/eng/Manuals/Wireless/CWR-854/CWR-854%20ver%20F%20Quick%20Install%20Guide.pdf

The internet connection has a security that's why you can't access the internet. The only thing you have to do is to know the wpa password of the router.

This router has a default username and password to configure all the settings. This is the manual for Cnet CWR-854 Router:

http://www.cnetusa.com/eng/Manuals/Wireless/CWR-854/CWR-854%20ver%20F%20User%20Guide.pdf

It seems that the router is already configured by an authorized person, the best thing you should do is contact the authorized person that knows everything about the router.

Your router model is CWR-854, I suppose.
Port forwarding instruction for your Cnet Wireless CNET CWR-854 Router can be found here. Choose the program for which you want the port to be forwarded or use the Default Guide.

No problem at all. The router can function as bridge with no conflicts with other routers. 

Seems like you need to verify that the web management interface is at the address your specified or that your PC is indeed wirelessly connected to the CWR-854.

The following suggestions assume you use Windows XP as your OS:

1. You need to connect to the CWR-854 via a network cable (one end connected to your PC the other to a LAN port on the CWR-854) initially.
2. You can try to access the web management interface at the IP address you expect, i.e. 192.168.1.1 or you can verify the IP address by finding the Default Gateway your PC is issued by the CWR-854 from:

• Right clicking on the tray icon of the network connection, choose "Status" then click on the "Support" tab to see the Default Gateway.
• OR click on "Start" then "Run...", type "cmd" then type "ipconfig" and read the Default Gateway value under the section for the "Ethernet adapter Local Area Connection".

Use the Default Gateway value as the new address to use for the web based utility if it differs from what you expected.

Type in the address of your router - you say that is set to192.168.1.254 and you will see the config page( after logging in ) for your router. This is more usually 192.168.1.1 though .

You may be advised to use an RJ45 LAN cable to try the following, then use the wireless connection when all ais up and running. The default Login ID and Password is ?root? with password ?1234?. This Wireless Access Point?s default IP address is 192.168.1.253, You can reset this Wireless Access Point back to its default settings by clicking on Reset button, and then press OK button to confirm your decision. Note: you can also hold down the reset button on this Wireless Access Point?s panel for more than 10 seconds to reset its default settings back to factory default. If the reset doesnt work turn off router then on again first, but if the reset doesnt work, the router may need to be replaced.