HAIER TV CODES FOR ROGERS REMOTE - One For All URC3110 Remote Control

https://www.walmart.com/ip/Replacement-Remote-for-HAIER-TV-5620-97-TV562097-RTTV562097-HL19D2-HL24XD2-HL32D2A-HL321D1-HL32D1-HL42XD1-L19C1120-HL42XD2A-HL42XD2B-L24C/947033387

Remote Control Codes For Haier TVs Codes For Universal Remotes

Here are the possible remote codes for Hair.
Haier: 0698 0869 0264 0768 0779

Hi MiMi I attempted to search for the Code for your TV under several of the Rogers remotes and was unable to find one. You can do a general search for a code on any of them following some minor instructions. Navigate to link , choose the remote that looks like yours and then to the left will be choice to search all possible codes. Hope this helps. Good luck Rogers Cable Remote Support

Is it a Haier remote? Haier customer service person says that no Haier flat screen TVs or, for that matter, DVD players, are set up to be able to work with a universal remote; only their older tube TVs do. The Haier remote must be used. So we all can stop trying to find the codes. It wold have been nice is the user guides had revealed this unfortunate absence of functionality

Replacement on the Haier website is $19.99 plus a load in shipping.

I am not sure if your remote has a search code function, Most do. Check your instructions. I proceeded to go one by one through our remote's TV codes with the search code function, pushing the power switch after each code, until the set turned on.
Hope some of this helps


Read more: http://wiki.answers.com/Q/What_is_the_universal_remote_code_for_a_haier_tv#ixzz1kUnuLc2r


Read more: http://wiki.answers.com/Q/What_is_the_universal_remote_code_for_a_haier_tv#ixzz1kUnRB5An

It will work with a Total Control TV Replacement Remote Control, which you can get from argos for £7.99.


There are only 2 codes for a haier tv.

Setup Code : 0698
Setup Code : 0264

What is the Comcast remote code for ProView 3200 TV

Comcast remote codes for your TV. 11034 or 10768

We have a Haier TV model 3 HL32R2a, the cable remote no longer turns the set off or on or controls the volume. We can only do that with the tv remote. Tried putting in the universal code, and the Haier code and it didn't work. Please help.

The GE Universal Remote will do the job. I have on and it works for my Haier TN201AUV TV. You can also find a replacement Haier remote on Remote Hound's web site.

On the other side of this I have a Dish Network remote that WILL NOT work. The Dish Network remote does not list any codes for Haier. Dish Network Tech Support could offer no help.

In an attempt to solve the problem myself, I looked on-line at GE's site listing all of the manufacturers' for their remotes and found the identical code that worked for my Haier TV also listed under APEX TV's. The Dish Remote lists (11) APEX TV codes. Ironically, NONE OF THEM WORK!

I'm stuck with using both remotes... and that's BULL$H!T