American audio lab al-k7 won'play disc and says no disc

Every blu ray or dvd player sold in the world comes as standard unlocked to play any disc from any region. On the fifth play of a disc the DVD or Bluray will become locked to that region. So if you play 5 USA dvd's on the player after the fifth disc has been played only US dvd's will be recognised by the player, Same applies to BLUrays. So if i were you i would be careful about what discs you are putting in the player. Otherwise you will be left with a bluray player that cannot be used in Australia. After that happens the only way to play other region discs would be to get the player unlocked. Another point to add , a blueray player has two lasers one to play bluray and another to play DVD's. Lasers can fail so you could be able to play DVD's but not Bluray or vice versa depending on which laser has failed.

Hello
Insert a lens cleanig disc into the device and play it at least three times. If the fault is due to any dirt or dust accumulated on lasser pickup lens, thei will rectify the problem. If this does not help you, the laser pickup lens unit of your device should be replaced with same type and number. The lens cleaning disc can be bought from most of the electronic sparepart shops at your town, and won't cost more. OK.

Have you tried a blank disc with "audio" or "music" marked on it? It won't record on data discs.

The problem could be the selection and credit computer or possibly the K7 switch actuator. I can repair the computer and I stock the K7 switch actuator. Please email [email protected]

U from Europe,Asia or the Middle East?Yes.Ur Blu-Ray player play only DVD disc in PAL format.U bought American DVD disc in the United States?Yes.U can't play american DVD disc in ur Blu-Ray player?Because the US American DVD disc u bought in the United State play only in the NTSC format.

are your cd-r data or audio..(maybe AAV cant play the data disk) make sure its audio ...you can also try wiping the disk with a dry paper towel in a circular motion only (one way)...get any fingerprints /oils off the disk...

if your ps2 is not a modded one sorry to tell you but yours is a pal ps2 (means you live somewhere in asia europe)so there is some difference i the american ps2 disc(ntsc) and pal ps2 disc both are designed to play in specific consoles so if you bought they console from ntsc territory(japan ,north america) it should work for sure but sometimes in japan and all they sell pals also but there is still chance try returning the cd to the shop and buy a pal disc or you can mod your ps2 from ps2 technicians (they are all around the world,every console shop has one) and then you can play american disc this is the only chance it will only take a small 25 bucks from you just mod it and u can play games u burned from your computer and also any pal ,ntsc territory original discs also

When you turn on the unit the cd draw seams to open. I hear it making a noise like if it is trying to get ready to play. When you shut the draw it won't play, change tracts, or the disc thing to put in more disc wont work. Someone please help me

try the following link to download & install the drivers...

http://support.creative.com/Products/ProductDetails.aspx?catID=1&subCatID=206&prodID=4857&prodName=Sound%20Blaster%20Live!&subCatName=Live!&CatName=Sound+Blaster

i have solve the problem with one of the rep thank you