Whirlpool dishwasher will not drain. It is only 2 years old. I pressed the drain/cancel button does not drain but i hear a motor. I did a complete wash cycle and still will not drain.
thanks, yvonne
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
sounds like there is either a loose wire or bad switch on the water flow pump, not the drain pump What is the model number of the unit that your working on?
If you hear the drain motor running but water not draining then there appears to be a blockage in the drain sump or hose. Assuming your kitchen drain is clear you will have to check filters inside the dishwasher and worst the drain pump.
If you do not hear drain motor running then the drain motor needs to be checked.
FYI, for anyone else with the same symptoms. I took mine apart and found that the seal on the motor shaft failed and over time corroded the motor shaft bearing causing it to failed. I ordered full motor assembly from the parts store.
although hose is not clogged is it installed correctly?is there what they call a high loop installed under sink( loop up high as possible under sink to prevent both water siphoning out or returng back to machine after cycle complete. when you press the cancel button do you hear the water flowing freely into sink drain, if not sounds like you got somthin in hose or pump assy
×