Question about Office Equipment & Supplies
The faxes I send are being received with very light print that is sometimes hard to read.
THE CIS SCANNER /REFERENCE WHITE NEEDS CLEANING AND THE CIS TRAINING NEEDS TO BE DONE.
IF ABOVE DOES NOT HELP U NEED TO REPLACE CIS .
Posted on Oct 16, 2007
Tips for a great answer:
Aug 22, 2015 | HP Photosmart 3210 Printer
May 03, 2011 | HP Officejet Pro L7780 All-In-One InkJet...
Jan 10, 2011 | Office Equipment & Supplies
Nov 24, 2010 | HP J4680 Office Jet All-In-One Printer
If you need printed confirmation that your faxes were successfully sent, follow these instructions to enable fax confirmation before sending any faxes. Select either On Fax Send or Send & Receive.
The default fax confirmation setting is Off. This means that the HP All-in-One will not print a confirmation report for each fax sent or received. A confirmation message indicating whether a fax was successfully sent appears briefly on the display after each transaction.
To enable fax confirmation from the control panel
1. Press Setup.
2. Press 2, and then press 3.
This selects Print Report and then selects Fax Confirmation.
3. Press to select one of the following, and then press OK.
Off Does not print a fax confirmation report when you send and
receive faxes successfully. This is the default setting.
On Fax Send Prints a fax confirmation report for every fax you send.
On Fax Receive Prints a fax confirmation report for every fax you receive.
Send & Receive Prints a fax confirmation report for every fax you send and
Oct 27, 2010 | HP Officejet 6310 All-In-One InkJet...
Aug 14, 2009 | HP OfficeJet 4315 All-In-One InkJet...
May 06, 2009 | HP Officejet 5610 All-In-One InkJet...
Dec 10, 2008 | HP Officejet 5610 All-In-One InkJet...
Oct 31, 2007 | Brother IntelliFAX 2600 Fax
345 people viewed this question
Usually answered in minutes!