Question about NorStar M7310 Phone

1 Answer

Line # 1 is shorted out in main control box. Is there any way to make what was formally line #1 use the second line in the main box, then use line #3 in the main box for line #2

We have a Norstar Meridian phone system with two outside lines running into the main control box. Originally the two outside lines were plugged into lines 1 and 2 in the control box. Recently line 1 in the control box has shorted out and does not function properly. I have moved the plugs from the lines outside from line one into the line two in the control box and line two into the line three slots in the main box. I now can receive calls on both lines at any of our eleven phones (m7310's and M7208's). However, calls on line one flash on line two and calls on line 2 are lost in space. Can I reprogram the telephones that use line one button to identify with and to use calls coming in on line 2 in the control box as line one and line 2 button to receiver calls that come to the control box on line 3?

Posted by Samuel Strait on

  • Samuel Strait
    Samuel Strait Dec 20, 2013

    Maybe, we can simlify this a bit. The system's master panel has space for eight outside lines. How do you program the M7310 phones to accept additional outside lines?

×

Ad

1 Answer

Md Sharfin

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

Motherboard power pin not working and green light not working...and power light ont open...

Posted on Dec 18, 2013

  • Samuel Strait
    Samuel Strait Dec 20, 2013

    I am not sure what if anything this has to do with solving my problem. Master panel has only one light and it is red and on, indicating it has power.

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Meridian 7310 - Issues


Mod cord, cable, jack or system port issue, call in your local tech/vendor to repair it.

Nov 13, 2012 | NorStar Meridian M7310 Phone

1 Answer

All of a sudden the line lights on our nortel switch Meridian M7310 phones started blinking and the lines are dead. Any ideas?


If you only have one line,why not just lose the Nortel system? You can reuse the wiring from the phone sets to the contoller as regular inside wire,and just plug in regular phones(and maybe put the Nortel phones and controller on EBay and make a few bucks off it!)

Oct 26, 2012 | NorStar Meridian M7310 Phone

1 Answer

I need someone who can help me do some programing with our small business Norstar system--changing the main greeting, after hours greeting, mailbox issues, etc.


I need to chane the main greeeting on the Norstar T7316E and the message that lets you go to different people mail boxes, it is already programmed , but I would like to change it, Thanks
D
[email protected]

Aug 28, 2010 | NorStar Meridian M7310 Phone

1 Answer

NorStar Meridian M7310 unwanted auto-forward


Sounds like the one touch button for the basement set on the console is stuck down there by transfering any calls to that extension. Make sure that the button is pulled fully up (sometimes just the corner is stuck down).

May 13, 2010 | NorStar Meridian M7310 Phone

1 Answer

We have a Norstat Meridian M7310 phone system - is


THE PHONE IN THE BACK IS THIS A NORSTAR PHONE. WHAT IS THE QWEST VMAIL AND WHAT DOES THE NORSTAR SYSTEM LOOK LIKE . SOUNDS TO ME THAT QWEST IS SUPPLING VMAIL AND NOT YOU OWEN NORSTAR COULD YOU CLARIFY THIS FOR ME.

Dec 17, 2009 | NorStar Meridian M7310 Phone

1 Answer

There is terrible static on all lines and the phone company states that it is our phone system. We have the Northstar Meridian M7324.


It sounds like a reboot of your system may be in order, When ever you have a system wide problem of this scope the main box on your wall is having trouble. power it down and power back up, this should fix it.

Dan

Nov 02, 2009 | NorStar Meridian M2616 Phone

1 Answer

Meridian M7310-shows outside line in use and cannot disconnect


the easist way to reset that is to reset the system. unplug it for a moment that should clear it.

Mar 27, 2009 | NorStar Meridian M7310 Phone

1 Answer

Our office has 13 phones all the same. Some of the phones do not ring. I would like to get one of the phones to ring. It is a Norstar Meridian M7310


You will have to go into system programming, under sets, line appearances. You will need to set the lines on the phones to appear and ring, not just appear.

Dec 08, 2008 | NorStar Meridian M7310 Phone

Not finding what you are looking for?
NorStar M7310 Phone Logo

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

martin hogg

Level 2 Expert

157 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...