No water coming out of spout

If the water pressure coming out of the steam/hot water arm is fine, then the issue is likely with the brew unit or the grinder. Here are a few things you can check:

1. Clean the brew unit: A dirty or clogged brew unit can slow down the flow of water. Remove the brew unit and clean it thoroughly, making sure to remove any coffee residue or buildup.
2. Check the grinder: A dull or clogged grinder can also slow down the flow of water. Make sure the grinder is set to the appropriate setting for your coffee beans and check that the grinder is not clogged.
3. Check the water flow meter: The water flow meter measures the amount of water flowing through the machine. If it is clogged or damaged, it can affect the flow of water. Try cleaning the water flow meter with a soft-bristled brush and see if that helps.
4. Check the water filter: If your machine has a water filter, it may be clogged and affecting the flow of water. Replace the filter if necessary.

If none of these solutions help, it may be a more serious issue and you may need to bring your machine to a professional for repair.

Sounds like milk steam apparatus is clogged. Try to disassemble this portion and clean thoroughly. Descaling will not help this section.

Either the grind is too fine and the water cannot go through or the brew unit is blocked.

Remove the areator see if water comes out spout better if so clean out aerator they get limed up or get junk in it..

i can try and help you get this figured out1st thing i would try is to start a shot without the portafilter in the machine. does water come through the screen, or is there literally steam coming through, or both. i have a feeling your either not putting enough coffee in the portafilter (basket) and/or the grind is not fine enough. it should take about 23-33 seconds to get a total of 1 1/2 oz of espresso. let me know if this helps, brian

Expansion valve, coffee grind might be too fine.

- Make sure that the filled water container is in the appliance.

- Turn the program selector to "On" with lighting and place a container under the hot water spout and another

under the steam spout.

- Press the hot water button, turn the steam selector counterclockwise and dispense hot water until it flows in

quiet, continuous streams.

- Press the hot water button again.

Turn the steam selector clockwise to o, to turn off the water.

If this doesn't do it for you, you are doing it wrong!

run vineger through it or CLR before they plug up completly. good luck

See if there is a sediment screen at the inlet to the filter from the faucet and see if it's obstructed or clogged. Obviously, make sure you are using the correct filter cartridge and that the filter discharge is also clean.

the spout is also the diverter which sends the water up to the shower head. Assumming that the shower head isn't clogged with lime you should be able to solve the problem by removing the spout and taking it to a hardware store or home depot for a replacement. Most spouts just unscrew but some have a set screw which holds em in place. Look for the set screw on the underside of the spout. good luck