MY PS2 FAN NOT WORKING AND HE RED LIGHT IS

Here are a few troubleshooting tips to try:
1) Check all cooling vents for blockage (dirt/hair/debris)
2) Are cooling fans running?
3) Is there enough space between cooling vents and surrounding objects

Ensuring your PS2 is cleaned regularly is vital to its survival. As with computers and consoles alike, the cleaner they are, the cooler they run, the faster and more responsive they are.

Check out the some disassembly and cleaning videos on youtube

Just hit the link below

YouTube

if it's a slim PS2, try unplugging the AC from the wall and wait 5 minutes before plugging in.
hope this helps :D

TIME TO GET A PS3

If the light on the controller is flashing then the batteries are still good. There is a small reset button on the receiver that came with the controller. use a needle to reset it while it is still in the ps2. make sure that the ps2 is turned on and the green light is flashing on it. it should blink a few times and then the light on the controller should turn red. once it does then press start and your good to go.
Hope this helps!

To confirm: red light blinking does mean that the console is overheating, which I know from experience.

Solution: Do not leave on carpet or any materials similar as they insulate. If possible, leave the console vertical instead of horizontal and this will help cool the system. Better yet, if you can still find one, a USB fan that plugs onto the front of your grill.

Hope this helps.
Read more: http://www.ps3news.com/forums/pc-tech-support-news/ps2-overheats-shuts-itself-off-37172.html#ixzz0OqeZo6Sy

Feel it and see if it's hot, It may be overheating. If so they have small fans that you plug into the usb port in the front.

Red light means ur game pad's analog function is on. If it is off then the function will b digital. Remember each game adjusts analog/digital function itself automatically. Plz feel free 2 ask ny problems related PS2.

Thank you,
KABID.
[email protected]

when it doesn't blink it means its connected if you notise when you push a button it will flash on the chip

I hope you know the light engine to these sets cost 1,900.00 up to 2,500.00 also did you reset lamp timer when you installed new lamp to tell set lamp has 0 hours on it?

Try $99
http://www.frys.com/catreq/6746